SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501908BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions CM512723200ECCREG2R4 16GB (4x4GB) DDR2 400MHz ECC Registered DIMM memory upgrade
Four 4 GB DDR2 registered ECC DIMMs totalling 16 GB at 400 MHz for HP xw8200 workstations
- Capacity16GB (4 x 4GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 400 (PC2 3200)
- CAS LatencyCL3
- Timing3-3-3
- Voltage1.8V
- 16 GB kit (4 × 4 GB) expands xw8200 to its true 16 GB limit
- Registered ECC DDR2 400 MHz protects server data integrity
- CL3 3-3-3 timing at 1.8 V keeps latency low
- 240-pin 2Rx4 modules install in pairs after first DIMM
- CMS lifetime warranty backs compatibility with listed HP workstations
Capacity and fit
This 16 GB kit contains four 4 GB registered ECC DIMMs built for the HP xw8200 workstation series. Each module runs at DDR2 400 (PC2-3200) with CL3 timing at 1.8 V. The dual-rank 2Rx4 design matches the chipset limit of eight ranks. BIOS must be current for the full 16 GB to be recognised.
Sustained behaviour
Registered buffering and ECC keep data integrity stable during long server workloads. The modules operate within standard DDR2 voltage and timing, so thermal load remains predictable across extended sessions. Rank population rules require the first DIMM singly, then pairs, which maintains consistent electrical loading.
Upgrade context
The kit replaces smaller or non-ECC configurations that cannot reach the 16 GB ceiling or lack error correction. It is not suited for systems that accept only single-rank modules or non-registered memory. Builders needing higher density per slot or a newer DDR generation must choose a different platform.
주요 특징
- 16 GB kit (4 × 4 GB) expands xw8200 to its true 16 GB limit
- Registered ECC DDR2 400 MHz protects server data integrity
- CL3 3-3-3 timing at 1.8 V keeps latency low
- 240-pin 2Rx4 modules install in pairs after first DIMM
- CMS lifetime warranty backs compatibility with listed HP workstations
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512723200ECCREG2R4 |
| Capacity | 16GB (4 x 4GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Timing | 3-3-3 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Hp Workstation Xw8200 Series |
| Package Content | 1 Memory RAM Stick |
이 상품에 대한 질문
How much power does this DDR2 400 memory kit draw at its rated 1.8V when the workstation runs continuously?
Each module operates at the standard DDR2 voltage of 1.8V; total power draw depends on the system's memory controller and workload.
What must the HP xw8200 workstation already have installed so these four 240-pin Registered ECC DIMMs can function?
The board must support Registered ECC DDR2 memory, provide six 240-pin slots, and run a BIOS version that recognises 16 GB across four dual-rank modules.
Can I keep the original 4 GB of slower DDR2 memory in the other two slots alongside this 16 GB kit?
The chipset allows a maximum of eight ranks; this kit uses eight ranks itself, so no additional DIMMs can be added without exceeding the rank limit.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
