COUGAR
COUGAR MHP120 120 mm 2000 RPM HDB PWM case fan
120 mm PWM case fan spins at up to 2000 RPM, delivering 82.48 CFM airflow and 4.24 mm H2O static pressure through a hydraulic bearing with anti-vibration dampers
- Fan Counts1 Fan
- Fan ControllerNo Controller
- TypeCase Fan
- Fan Size120mm
- Fan Thickness25mm
- Bearing TypeHydraulic Bearing
Option 1 Pack
- 1 Pack
- 3 Packs
- High airflow of 82.48 CFM for efficient case cooling
- 24 mm H₂O static pressure excels on radiators and dense meshes
- Hydraulic bearing and PWM control span 600-2000 RPM
- Metallic-reinforced hub and shell add structural rigidity
- Anti-vibration dampers and low-noise adaptor reduce operating noise
120 mm PWM case fan for radiators
The COUGAR MHP120 is a 120 mm case fan built around a hydraulic bearing and a four-pin PWM connector. Its metallic-reinforced motor hub and shell add structural rigidity while the supplied anti-vibration dampers reduce transmitted resonance. A 100 mm low-noise adaptor and a 300 mm extension cable are included for flexible routing.
Suited to high-static-pressure cooling.
This fan targets radiators and restrictive heatsinks where its 4.24 mm H₂O pressure rating at 2000 RPM matters. Builders who prioritise absolute quiet over airflow density should look elsewhere, as the maximum noise level reaches 41.2 dB(A). Systems without a PWM header cannot use the automatic speed curve.
Sustained output at rated voltage
At 12 VDC and 0.23 A the motor draws 2.76 W while delivering 82.48 CFM across the 600 to 2000 RPM range. The hydraulic bearing maintains consistent torque during prolonged operation and the reinforced hub resists flex under continuous load. Speed stability stays within the stated tolerance without thermal throttling.
주요 특징
- High airflow of 82.48 CFM for efficient case cooling
- 24 mm H₂O static pressure excels on radiators and dense meshes
- Hydraulic bearing and PWM control span 600-2000 RPM
- Metallic-reinforced hub and shell add structural rigidity
- Anti-vibration dampers and low-noise adaptor reduce operating noise
사양
| Brand | Cougar |
|---|---|
| Model | MHP120 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 600-2000 RPM +/- 200RPM |
| Air Flow | 82.48 CFM +/- 10% |
| Noise Level | 41.2 dB(A) (Max.) |
| Power Connector | 4 Pin PWM |
| Features | Metallic-reinforced Motor Hub & Shell Extreme Cooling Fan With 2000 RPM (max) HDB Bearing & PWM Control Anti-vibration Damper Air Pressure: 4.24 mm H2O±10% Rated Voltage: 12 VDC Rated Current: 0.23 A Power Consumption: 2.76 W +/- 10% Cable Length: 200 mm (With 100mm Y-cable) Weight: 186g |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | 1 x MHP120 1 x 300mm Extension Cable 1 x 100mm Low-Noise Adaptor Fan Screw Kit User Manual |
이 모델의 다른 버전
같은 라인업에서 1개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Does the 4-pin PWM connector plug straight into a standard motherboard fan header?
Yes, the 4-pin PWM connector fits any standard motherboard fan header and draws 12 VDC at 0.23 A.
Will the 120 mm frame and 25 mm thickness fit the same mounting holes as my older 120 mm fans?
Yes, the 120 x 120 x 25 mm dimensions match the standard 120 mm mounting pattern used by older fans.
How can I confirm the hydraulic bearing is running within its 600-2000 RPM range after installation?
Check the RPM reading in BIOS or fan-control software; at minimum PWM it should sit near 600 RPM and at maximum PWM near 2000 RPM.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001044BTC
재고 있음