Crucial BX500 CT240BX500SSD1 240GB internal SSD
- Internal Solid Stat…
- Consumer
Crucial
2.5-inch SATA drive stores 2TB on 3D NAND with up to 540 MB/s reads and 500 MB/s writes
The Crucial BX500 CT2000BX500SSD1 is a 2.5-inch internal SSD built with Micron 3D NAND for consumer desktops and laptops. It replaces a mechanical hard drive to deliver quicker boot times, faster file loads and snappier overall system responsiveness. The drive draws far less power than a typical hard drive, helping extend battery life in portable machines. No DRAM cache is included on the controller.
Two terabytes provide ample room for an operating system, applications and a large media library. Sequential reads reach up to 540 MBps and writes up to 500 MBps, so large transfers and game level loads complete quickly. Sustained write performance will taper once the SLC buffer fills during very heavy workloads. The 1.5M hour MTTF rating reflects the endurance expected for typical consumer use.
The SATA III link caps maximum throughput at 6 Gbps, so the drive cannot exceed its rated 540 MBps read and 500 MBps write regardless of workload. It operates reliably between 0°C and 70°C inside standard 2.5-inch bays. The package includes a 7 mm height SSD and Acronis True Image cloning software for straightforward migration.
| Brand | Crucial |
|---|---|
| Series | BX500 |
| Model | CT2000BX500SSD1 |
| Part Number | CT2000BX500SSD1 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Cache | 0MB |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 500 MBps |
| MTTF | 1.5M hours |
| Features | Boot up faster. Load files quicker. Improve overall system responsiveness 300% faster than a typical hard drive Improves battery life because it's 45x more energy efficient than a typical hard drive Micron 3D NAND - advancing the world's memory and storage technology for 40 years |
| Operating Temperature | 0°C ~ +70°C |
| Height | 7.00mm |
| Package Content | 2.5-inch 7mm SSD SATA 6Gb/s Acronis True Image for Crucial cloning software and installation instructions |
| 배송 무게 | 0.03 kg |
| 포장 크기 | 131 × 98 × 14 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, the 7mm height matches the standard 2.5-inch 7mm bay used by many laptops, so the drive will fit without a spacer.
Run a benchmark tool such as CrystalDiskMark on a fresh Windows install; you should see sequential read speeds approaching 540 MBps and write speeds approaching 500 MBps on the SATA III link.
The box contains only the 2.5-inch 7mm SSD and a download code for Acronis True Image cloning software; brackets and SATA cables are not included and must be purchased separately if your system needs them.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?