DELL PowerEdge M640 Blade Server 2x Xeon Gold 6150 32GB DDR4
- Blade
- Blade
DELL
Half-height blade server with dual 18-core Xeon Gold 6154 CPUs, 16 GB DDR4, H330 RAID controller and dual 10 Gb networking
SSD (Installed) No
The Dell PowerEdge M640 is a half-height blade designed for modern data centres. It ships with two Intel Xeon Gold 6154 processors, each running at 3.0 GHz with a 3.7 GHz turbo and 18 cores. Sixteen gigabytes of DDR4 2666 MHz registered ECC memory are installed across 16 slots, supporting up to 1.5 TB total capacity. The platform targets virtualisation, private cloud and high-performance computing workloads.
A Broadcom 57810S-K dual-port 10 Gb blade network daughter card provides high-throughput connectivity. The PERC H330 controller manages two 2.5-inch SAS or SATA drive bays with RAID 0, 1, 5, 10 and 50 support. Graphics are handled by a Matrox G200 chip with 8 MB video memory. iDRAC 9 Enterprise enables remote management and automation to reduce operational overhead.
The blade includes two 2.5-inch SAS/SATA caddies and the 57810S-K network card for immediate deployment. No operating system, front bezel or ready rails are supplied, so administrators must provide those separately. The half-height form factor fits PowerEdge MX and M1000e enclosures, allowing flexible scaling as infrastructure grows. Buyers who need an operating system pre-installed or a full-height blade with more drive bays should look elsewhere.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3.00 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 18-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 16GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc H330 Controller |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/10/50 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Slide the half-height blade into an empty bay until the latch clicks, then use the iDRAC9 Enterprise interface to verify the blade is recognised and update firmware before powering on the operating system.
The blade has 16 DDR4 slots supporting up to 1.5TB total; installed 16GB uses two 8GB modules, so future upgrades add registered ECC DDR4 2666MHz modules in matched pairs.
The 3.0GHz base clock across 36 total cores is the sustained ceiling; 3.7GHz turbo is opportunistic and thermal throttling will hold the processors at base frequency under continuous load.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?