저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black Micro-ATX tower with dual tempered glass side panels and three pre-installed ARGB fans visible

DIYPC

DIYPC ARGB-M1-BK Micro ATX PC case

SKU CH-VK5H-FA57E MPN ARGB-M1-BK

Compact Micro-ATX tower with tempered glass panels, three pre-installed 120 mm ARGB fans and top 360 mm radiator support for liquid cooling

  • TypeMirco ATX Tower
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityMicro ATX / ITX
  • Micro-ATX and ITX motherboards fit with room for a 330 mm graphics card
  • Three pre-installed 120 mm ARGB PWM fans deliver immediate airflow and lighting
  • Top panel accepts up to a 360 mm radiator for liquid-cooling builds
  • USB 3.0, USB 2.0 and HD audio ports sit on the bottom I/O panel
  • Dual tempered-glass side panels showcase the interior and ARGB light strip

Micro ATX Tower for Compact Builds

The DIYPC ARGB-M1-BK is a black Micro ATX tower built from steel with tempered glass on both sides. It accepts Micro ATX and ITX motherboards and comes with three pre-installed 120 mm ARGB PWM fans for immediate airflow and lighting.

Compatibility Checks Before Ordering

Verify that your graphics card measures no more than 330 mm and your CPU cooler stays within 175 mm of height. Ensure your power supply fits the 170 mm bottom-mounted limit and that the board provides a 5 V addressable header if you want motherboard-synced ARGB control.

Sustained-Load Thermal Behaviour

The top panel supports a radiator up to 360 mm and optional 120 mm or 140 mm fans for liquid-cooling capacity during long sessions. Magnetic dust filters at the top and bottom keep intake clean without restricting flow, while the rear and side exhaust fans maintain steady pressure under continuous load.

주요 특징

  • Micro-ATX and ITX motherboards fit with room for a 330 mm graphics card
  • Three pre-installed 120 mm ARGB PWM fans deliver immediate airflow and lighting
  • Top panel accepts up to a 360 mm radiator for liquid-cooling builds
  • USB 3.0, USB 2.0 and HD audio ports sit on the bottom I/O panel
  • Dual tempered-glass side panels showcase the interior and ARGB light strip

사양

BrandDIYPC
ModelARGB-M1-BK
TypeMirco ATX Tower
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityMicro ATX / ITX
Side Panel2 x Sides Tempered Glass Panel
LEDARGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots4
Front PortsUSB 2.0 x 1 / USB 3.0 x 1 / Audio In & Out (HD)
Fan OptionsTop: 2 x 120mm or 140mm fan (Optional)
MB Side: 2 x 120mm ARGB Reverse Blade PWM Fan (pre-installed)
Rear: 1 x 120mm ARGB PWM Fan (pre-installed)
PSU top : 2 x 120mm fan (Optional)
Pre-installed FansRear - 1 x 120mm / Side - 2 x 120mm
Radiator OptionsTop - Up to 360mm
Max GPU Length330 mm
Max CPU Cooler Height175 mm
Max PSU Length170 mm
배송 무게6.96 kg
포장 크기552 × 457 × 282 mm

이 상품에 대한 질문

Will a 330 mm graphics card fit with the pre-installed side fans in place?

The case allows up to 330 mm GPU length; the two 120 mm side fans are pre-installed, so measure your card against that limit

Can I run a 360 mm radiator on top while keeping the top dust filter?

Top supports up to 360 mm radiator; the magnetic dust filter sits on the same panel and can be removed for radiator mounting

Does the ARGB lighting need a 5 V addressable header on the motherboard to work?

Lighting can be controlled by the manual button on the case or synced via a 5 V 3-pin ARGB header if your board has one

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.