DIYPC Vanguard-F2-BK ATX Full Tower PC Case Black
- ATX Full Tower
- Black
DIYPC
Black ATX full-tower case with tempered-glass panels, five pre-installed 120 mm ARGB PWM fans, front USB 3.0 and Type-C ports, and room for 480 mm side or 360 mm top radiators
Options Vanguard-F2-Pro
The DIYPC Vanguard-F2-Pro is a black steel and tempered-glass full tower that accepts ATX, Micro-ATX and ITX motherboards, including back-plug designs. Five ARGB PWM fans are factory fitted — four on the motherboard side and one at the rear — giving immediate airflow and lighting without extra purchases. Tool-free panel removal on four sides speeds assembly and maintenance.
The interior clears graphics cards up to 420 mm long, so buyers must verify their chosen GPU fits within that limit before ordering. CPU coolers up to 180 mm tall and power supplies up to 250 mm deep are also supported. Radiator mounts allow a 480 mm unit on the motherboard side and a 360 mm unit at the top for custom liquid cooling.
An addressable-RGB hub with PWM control is bundled, letting the builder sync all lighting through a 5 V motherboard header or use the case button for standalone effects. The top I/O panel supplies two USB 3.0 ports, one USB Type-C port and HD audio jacks for modern peripherals. Three 3.5-inch and three 2.5-inch drive bays provide storage flexibility.
| Brand | DIYPC |
|---|---|
| Model | Vanguard-F2-Pro |
| Type | ATX Full Tower |
| Color | Black |
| Case Material | Steel / Tempered Glass |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / ITX / Micro ATX |
| Side Panel | yes |
| LED | ARGB |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 9 |
| Front Ports | 2 x USB 3.0 / 1 x Type C / Audio In & Out (HD) |
| Fan Options | MB side - 4 x 120mm ARGB PWM Fans (Pre-installed) Top: 3 x 120mm or 3 x 140mm Fans (Optional) Rear: 1 x 140mm ARGB PWM Fan (Pre-Installed) PSU Chamber : 2 x 120mm Fan (Optional) Fan-HDD rack: 1 x 120mm (Optional) |
| Radiator Options | MB side can fit up to 480mm , top support 360mm water cooling radiator |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 250 mm |
| Dimensions | 18" Depth x 10.32" Width x 22.7" Height |
| Weight | 16lbs |
| 배송 무게 | 14.15 kg |
| 포장 크기 | 622 × 564 × 345 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The 420 mm limit is measured with the four pre-installed 120 mm ARGB PWM fans on the motherboard side in place, so any graphics card up to that length will fit without removing them.
The front Type-C port is wired to the motherboard's USB 3.0 header, so it operates at up to 5 Gbps rather than the higher speeds of USB 3.1 Gen 2 or USB 3.2.
The 180 mm CPU cooler limit applies to air coolers; a 360 mm radiator mounts in the top panel instead of the CPU socket area, so the two measurements do not conflict.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?