저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black aluminium enclosure converting M.2 SATA SSD to 2.5 inch SATA drive

EN-Labs

EN-Labs M.2 NGFF SATA to 2.5" SATA Adapter Enclosure 7mm B/B+M Key 2230 2242 2260 2280

SKU CH-RZMN-TNY9J

Converts a SATA-bus M.2 NGFF SSD (B or B+M key, 2230 to 2280) into a 2.5-inch SATA drive with a 7 mm aluminium enclosure

  • ColorBlack
  • MaterialAluminum
  • External InterfaceSATA
  • HDD Count SupportedNo
  • Number of Bay1
  • SpecificationsInterfation:M.2 NGFF(SATA-Bus) to 2.5" SATA. Enclosure case

Size M.2 SATA

  • Converts M.2 NGFF SATA SSDs to 2.5" SATA form factor
  • Aluminium enclosure fits 7mm drive bays for laptops or desktops
  • Supports B-key and B+M key modules sized 2230 2242 2260 2280
  • Plug-and-play operation requires no drivers or software installation
  • Not compatible with PCIe NVMe or PCIe AHCI M-key SSDs

Converts M.2 SATA SSDs to 2.5" SATA

This aluminium enclosure adapts a B-Key or B+M Key M.2 NGFF SATA SSD into a standard 2.5-inch SATA form factor. It accepts drive lengths of 2230, 2242, 2260 and 2280 millimetres. The 7mm case thickness fits typical laptop and desktop drive bays. It is not compatible with PCIe NVMe or PCIe AHCI M-Key SSDs.

Passive thermal design with no added power draw

The adapter contains no active cooling and draws no extra power beyond the drive itself. Aluminium construction helps dissipate heat from the SSD during normal operation. Silent performance is maintained because there are no fans or moving parts. The SATA interface speed and drive properties remain unchanged by the conversion.

Includes screwdriver and mounting screws

A small screwdriver and the necessary screws are bundled for securing the M.2 drive inside the enclosure. No software drivers are required; the adapter is transparent to the operating system and works on plug-and-play basis. The package contains the converter card already fitted inside the 7mm aluminium case.

주요 특징

  • Converts M.2 NGFF SATA SSDs to 2.5" SATA form factor
  • Aluminium enclosure fits 7mm drive bays for laptops or desktops
  • Supports B-key and B+M key modules sized 2230 2242 2260 2280
  • Plug-and-play operation requires no drivers or software installation
  • Not compatible with PCIe NVMe or PCIe AHCI M-key SSDs

사양

BrandEn-Labs
Model1 Bay
ColorBlack
MaterialAluminum
External InterfaceSATA
HDD Count SupportedNo
Number of Bay1
SpecificationsInterfation:M.2 NGFF(SATA-Bus) to 2.5" SATA. Enclosure case thickness: 7mm. Support: 2.5in HDD Hard Drive Bay.
FeaturesOnly fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit for PCIe NVMe / PCIe AHCI NGFF M.2 SSD with Key M, Pls check your M.2 SSD type before place order. Features: Socket 2 B-key M.2 NGFF SATA SSD to 2.5in SATA Adapter. The speed and other properties is not changed,only form conversion interface. Support all size the 22*30 mm/22*42 mm/22*60 mm/22*80 mm of M.2 NGFF SATA SSD. Plug and play, no extra driver is needed, Transparent to the operating system and does not require any software drivers.
Package Contents1 x M.2 NGFF(Socket 2 SATA Channel)SSD to 2.5inch SATA Converter Adapter Card with Enclosure. 1x Screw Driver. Screws.
SizeM.2 SATA

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install a 2280 M.2 SATA SSD into the 7 mm enclosure and which step is most often missed?

Slide the SSD into the B-key socket at a slight angle, press it flat, then secure it with the supplied screw before closing the 7 mm aluminium case; the step most often missed is fastening that retention screw, which leaves the drive loose.

What maintenance or replacement will the enclosure need over time?

The aluminium case and SATA connector are passive parts with no moving components, so no scheduled maintenance is required; only the tiny retention screw might need replacement if lost during a drive swap.

What is the first limit I will hit when using a SATA M.2 SSD in this adapter under sustained workloads?

The bottleneck is the SATA 6 Gbps interface itself, so sustained throughput cannot exceed the drive's own SATA speed rating regardless of workload duration.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.