저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 3.5 inch hard drive in anti-static bag

Epoch

Epoch 400-ARUI 8TB 7200 RPM SATA 3.5" Internal Hard Drive Replacement Kit

SKU CH-RP3R-TTMWQ

8 TB, 7200 RPM SATA 3.5″ drive kit validated for Dell PowerEdge 14 and 15 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • SATA 6 Gb/s interface fits standard drive bays
  • 5 inch form factor matches Dell PowerEdge 14G and 15G servers
  • Replacement kit includes carrier for direct hot-swap installation

Epoch 400-ARUI 8TB 7200 RPM SATA Drive

The Epoch 400-ARUI is an 8TB 3.5-inch internal hard drive spinning at 7200 RPM with a SATA 6Gb/s interface. It ships as a replacement kit validated for Dell PowerEdge 14G and 15G rack and tower servers. The drive is new and built with genuine components for enterprise storage arrays.

Suited for server storage upgrades, not desktop PCs

This drive targets administrators expanding capacity in compatible Dell PowerEdge R240 through R940xa and T150 through T550 systems. Buyers needing a 2.5-inch form factor or a different interface cannot use this kit. Workstations without 3.5-inch bays should consider other options.

SATA 6Gb/s interface decides compatibility

The single specification that determines fit is the SATA 6Gb/s interface combined with the 3.5-inch form factor. Only servers listed in the 14G and 15G families support this exact drive kit. Verify the server model before purchase to ensure the drive will be recognised.

주요 특징

  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • SATA 6 Gb/s interface fits standard drive bays
  • 5 inch form factor matches Dell PowerEdge 14G and 15G servers
  • Replacement kit includes carrier for direct hot-swap installation

사양

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

이 상품에 대한 질문

How much power does the 8TB 7200 RPM SATA drive draw under continuous server load?

The kit is built for Dell PowerEdge 14 and 15 generation servers where the backplane supplies standard 3.5-inch SATA power limits.

What server chassis or backplane must I already have to install this 3.5-inch SATA replacement kit?

It fits Dell PowerEdge 14G models such as R240 through R940xa and 15G models such as R250 through R7525 plus Tower T150 T350 T550.

Will the 6 Gb/s SATA interface negotiate down to 3 Gb/s on my older PowerEdge 14G backplane?

Yes, SATA 6 Gb/s is backward compatible so the drive will operate at the speed supported by the 14G or 15G controller.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.