Fractal Design Meshify 3 RGB FD-C-MES3A-06 PC Case
- ATX Mid Tower
- Black
Fractal Design
Mid-tower ATX case with mesh front, three pre-installed 140 mm fans, 20 Gbps USB-C front port, and room for 349 mm graphics cards
Options Meshify 3 - TG Clear Tint (White)
The Fractal Design Meshify 3 is a white steel ATX mid-tower that accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards. It ships with three 140 mm Momentum 14 PWM fans at the front and a clear tempered-glass side panel. The case targets builders who want strong airflow and a clean interior for high-end components.
Top, front and side panels lift off without tools, and the radiator brackets at the top and front are also tool-less. The cable cover and new cable aligners keep routing tidy behind the motherboard tray. Builders should note the single bottom dust filter and the lack of 5.25-inch external bays when planning drive layouts.
The top panel provides one USB Type-C 20 Gbps port, two USB 3.0 ports and a combo audio jack. Radiator support reaches 360 mm at the front, 280 mm at the top and 120 mm at the rear. Graphics cards up to 349 mm long and 176 mm tall fit in the seventh slot, while the internal drive area holds two 3.5-inch or four 2.5-inch drives behind the tray plus two dedicated 2.5-inch SSDs on the floor.
| Brand | Fractal Design |
|---|---|
| Series | Meshify 3 |
| Model | FD-C-MES3A-04 |
| Part Number | FD-C-MES3A-04 |
| Type | ATX Mid Tower |
| Color | White |
| Case Material | Steel |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Micro ATX / ATX / E-ATX / Micro ATX / ATX / Mini ITX / E-ATX / Mini ITX |
| Side Panel | Clear TG Side Panel |
| Dust Filters | Bottom |
| External 5.25" Drive Bays | No |
| Internal 3.5" Drive Bays | 2 x 3.5" HDD or 4 x 2.5" SSD behind MB tray |
| Internal 2.5" Drive Bays | 2 x Dedicated 2.5" SSD on case floor |
| Expansion Slots | 7 |
| Front Ports | 1 x USB Type-C 20Gbps, 2 x USB 3.0, 1x Audio Combo Jack |
| Fan Options | Front: 3 x 120/140 mm (3 x Momentum 14 PWM included) Top: 2 x 120/140 mm Rear: 1 x 120 mm |
| Pre-installed Fans | Front - 3 x 140mm |
| Radiator Options | Front - Up to 280mm / Front - Up to 360mm / Rear - Up to 120mm / Top - Up to 240mm / Top - Up to 280mm |
| 140mm Fans | 3 |
| Max GPU Length | Max GPU Length: 349 mm Max GPU Height: 176 mm (slot 7, including cables) |
| Max CPU Cooler Height | 173 mm |
| Max PSU Length | 180 mm |
| Dimensions | 17.05" x 9.02" x 19.96" |
| Weight | 19.40 lbs. |
| Package Content | Meshify 3 case User manual Accessory box |
| 배송 무게 | 10.66 kg |
| 포장 크기 | 597 × 533 × 343 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The case supports cards up to 349 mm and front radiators up to 360 mm, but simultaneous use at those maximums reduces clearance; check the combined length against the internal layout.
Yes, it requires a USB 3.2 Gen 2x2 header on the motherboard to deliver the full 20 Gbps speed.
The tray behind the motherboard holds either two 3.5 inch drives or four 2.5 inch drives, while the floor adds two dedicated 2.5 inch slots, so mixing is possible.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?