BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
G.SKILL
192 GB quad-channel DDR5 RDIMM kit running at 6400 MT/s with CL32 ECC registered stability for Xeon W790 workstations
The G.SKILL G5 Series provides 192GB of DDR5 registered memory in a 4×48GB configuration. It is built for Intel Xeon W-2400X workstations that require ECC error correction and quad-channel bandwidth. The modules operate at DDR5 6400 with CL32 timings and need a compatible Intel W790 motherboard.
Each RDIMM runs at 1.40V with a dedicated temperature sensor for monitoring. The kit uses hand-screened ICs tested for stability, and the registered buffer reduces electrical load on the memory controller. No heat spreaders are fitted, so chassis airflow must carry heat away from the bare modules.
On-die ECC and side-band ECC protect data integrity during extended rendering or compute sessions. Intel XMP 3.0 profiles apply the rated 32-39-39-102 timings at 6400 MT/s, though final stability depends on the CPU memory controller and motherboard QVL validation. Builders needing non-registered DIMMs or consumer chipset support should look elsewhere.
| Brand | G.SKILL |
|---|---|
| Series | G5 Series |
| Model | F5-6400R3239G48GQ4-G5 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Chipset | Intel W790 Series Chipset (w/ Quad-Channel Memory Support) |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Optimized for Intel Xeon W-2400X series processors Requires compatible Intel W790 chipset motherboard w/ 4-channel support On-die ECC & side-band ECC Dedicated temperature sensors Intel XMP 3.0 Support |
| 배송 무게 | 0.27 kg |
| 포장 크기 | 244 × 178 × 23 mm |
Seat each 48GB module firmly until the retention clips click into the 288-pin slots, then enable the Intel XMP 3.0 profile in BIOS so the kit runs at DDR5 6400 CL32 instead of the default JEDEC speed.
No routine maintenance is required; the on-die ECC and side-band ECC handle error correction automatically, and the dedicated temperature sensor allows the platform to throttle if needed, so replacement is only necessary if a module fails.
The 1.40V operating voltage combined with no heat spreader means thermal throttling via the dedicated temperature sensor is the first limit reached under prolonged heavy load.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?