NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
G.SKILL
192 GB quad-channel DDR5 RDIMM kit running at 6400 MT/s with CL32 ECC registered stability for Xeon W790 workstations
The G.SKILL G5 Series provides 192GB of DDR5 registered memory in a 4×48GB configuration. It is built for Intel Xeon W-2400X workstations that require ECC error correction and quad-channel bandwidth. The modules operate at DDR5 6400 with CL32 timings and need a compatible Intel W790 motherboard.
Each RDIMM runs at 1.40V with a dedicated temperature sensor for monitoring. The kit uses hand-screened ICs tested for stability, and the registered buffer reduces electrical load on the memory controller. No heat spreaders are fitted, so chassis airflow must carry heat away from the bare modules.
On-die ECC and side-band ECC protect data integrity during extended rendering or compute sessions. Intel XMP 3.0 profiles apply the rated 32-39-39-102 timings at 6400 MT/s, though final stability depends on the CPU memory controller and motherboard QVL validation. Builders needing non-registered DIMMs or consumer chipset support should look elsewhere.
| Brand | G.SKILL |
|---|---|
| Series | G5 Series |
| Model | F5-6400R3239G48GQ4-G5 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Chipset | Intel W790 Series Chipset (w/ Quad-Channel Memory Support) |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Optimized for Intel Xeon W-2400X series processors Requires compatible Intel W790 chipset motherboard w/ 4-channel support On-die ECC & side-band ECC Dedicated temperature sensors Intel XMP 3.0 Support |
| Shipping weight | 0.27 kg |
| Package size | 244 × 178 × 23 mm |
Seat each 48GB module firmly until the retention clips click into the 288-pin slots, then enable the Intel XMP 3.0 profile in BIOS so the kit runs at DDR5 6400 CL32 instead of the default JEDEC speed.
No routine maintenance is required; the on-die ECC and side-band ECC handle error correction automatically, and the dedicated temperature sensor allows the platform to throttle if needed, so replacement is only necessary if a module fails.
The 1.40V operating voltage combined with no heat spreader means thermal throttling via the dedicated temperature sensor is the first limit reached under prolonged heavy load.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?