G.SKILL Ripjaws SO-DIMM 32GB (2×16GB) DDR5 5600 CL40 F5-5600S4645A16GX1-RS laptop RAM

G.SKILL Ripjaws DDR5 SO-DIMM 32GB kit

This 32GB kit contains two 16GB DDR5 SO-DIMM modules rated at 5600 MT/s with CL40 timing and 1.10V operation. It is built for laptops and small-form-factor PCs that accept 262-pin DDR5 memory and can run at PC5 44800 speeds. The dual-channel configuration suits users who want a straightforward capacity increase without mixing modules.

Installing the modules and common issues

Installation follows the standard SO-DIMM procedure: power off the device, open the memory compartment, align the notch on the 262-pin module with the slot key, insert at an angle and press down until the retention clips engage. Because the kit uses Intel XMP 3.0 profiles, some systems may default to a lower JEDEC speed until the profile is enabled in BIOS. A frequent issue occurs when only one module is seated fully, leaving the system in single-channel mode or failing to post.

What to verify before ordering

Confirm that your laptop or small-form-factor PC supports DDR5 SO-DIMM memory and has two free 262-pin slots for the dual-channel kit. Check the manufacturer's qualified-vendor list or manual for 5600 MT/s CL40 compatibility and 1.10V operation. Ensure the BIOS is updated to a version that recognises the XMP 3.0 profile, otherwise the modules will run at the base JEDEC frequency.