G.SKILL Ripjaws SO-DIMM 16GB DDR5 4800 CL40 laptop RAM F5-4800S4039A16GX1-RS
- 16GB
- 262-Pin DDR5 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
G.SKILL
32 GB dual-channel DDR5 5600 SO-DIMM kit with CL40 timing and 1.10 V operation for 13th Gen Intel Core laptops
Capacity 32GB (2 x 16GB)
Speed DDR5 5600 (PC5 44800)
CAS Latency CL40
This 32GB kit contains two 16GB DDR5 SO-DIMM modules rated at 5600 MT/s with CL40 timing and 1.10V operation. It is built for laptops and small-form-factor PCs that accept 262-pin DDR5 memory and can run at PC5 44800 speeds. The dual-channel configuration suits users who want a straightforward capacity increase without mixing modules.
Installation follows the standard SO-DIMM procedure: power off the device, open the memory compartment, align the notch on the 262-pin module with the slot key, insert at an angle and press down until the retention clips engage. Because the kit uses Intel XMP 3.0 profiles, some systems may default to a lower JEDEC speed until the profile is enabled in BIOS. A frequent issue occurs when only one module is seated fully, leaving the system in single-channel mode or failing to post.
Confirm that your laptop or small-form-factor PC supports DDR5 SO-DIMM memory and has two free 262-pin slots for the dual-channel kit. Check the manufacturer's qualified-vendor list or manual for 5600 MT/s CL40 compatibility and 1.10V operation. Ensure the BIOS is updated to a version that recognises the XMP 3.0 profile, otherwise the modules will run at the base JEDEC frequency.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws SO-DIMM |
| Model | F5-5600S4040A16GX2-RS |
| Capacity | 32GB (2 x 16GB) |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Timing | 40-40-40 |
| Voltage | 1.10V |
| ECC | No |
| Multi-channel Kit | Dual Channel Kit |
| Features | Designed for laptops and small form factor PCs, the Ripjaws DDR5 SO-DIMM memory kit is the ideal memory upgrade. Providing faster data transfer speeds and higher energy efficiency than DDR4, experience a new era of speed with Ripjaws DDR5 SO-DIMM today! Constructed with hand-screened IC chips and hand-tested through G.SKILL's rigorous and highly selective binning process, each Ripjaws DDR5 SO-DIMM memory kit is built for performance and reliability. • DDR5 SO-DIMM memory module for laptops or small-form-factor PCs • Intel XMP 3.0 Support |
| Recommend Use | 13th Gen Intel Core Processors |
| Shipping weight | 0.02 kg |
| Package size | 173 × 76 × 13 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Open Task Manager or CPU-Z on Windows and verify the memory tab shows 5600 MT/s speed with 40-40-40 timings.
The box contains two 16 GB 262-pin DDR5 SO-DIMM modules; no extra parts are required for a standard laptop memory slot.
Choose the 32 GB dual-channel kit to enable dual-channel bandwidth and match the recommended 13th Gen Intel Core platform.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?