EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
GIGABYTE
A GeForce RTX 3070 GPU with 5888 CUDA cores, 8GB GDDR6 on a 256-bit bus, 1815 MHz core clock, WINDFORCE 3X cooling and 220W power draw
This GIGABYTE GeForce RTX 3070 Gaming OC graphics card targets gamers and creators who need strong 1440p performance. It ships with 8GB of GDDR6 memory across a 256-bit interface and connects via PCI Express 4.0. The GPU runs at a 1815 MHz core clock and packs 5888 CUDA cores for heavy compute tasks.
Under continuous load the card draws up to 220W through one 6-pin and one 8-pin power connector, so a 650W supply is recommended. The WINDFORCE 3X cooler uses alternate spinning fans to keep airflow steady during long sessions. Drivers expose the 2nd generation RT cores and 3rd generation Tensor cores for supported workloads.
The triple-fan design and metal backplate help dissipate heat while adding structural rigidity. Fan curves stay moderate in typical gaming scenarios, keeping acoustics low inside an ATX case. The 286 mm length fits most standard chassis without clearance issues. Power draw remains close to the rated 220W during normal operation.
| Brand | GIGABYTE |
|---|---|
| Series | Gaming |
| Model | GV-N3070GAMING OC-8GD (rev. 2.0) |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3070 |
| Core Clock | 1815 MHz |
| CUDA Cores | 5888 |
| Effective Memory Clock | 14000 MHz |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1 |
| DisplayPort | 2 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | WINDFORCE 3X |
| Thermal Design Power | 220W |
| Recommended PSU Wattage | 650W |
| Power Connector | 1 x 6-Pin + 1 x 8-Pin |
| Features | NVIDIA Ampere Streaming Multiprocessors 2nd Generation RT Cores 3rd Generation Tensor Cores Powered by GeForce RTX 3070 Integrated with 8GB GDDR6 256-bit memory interface WINDFORCE 3X Cooling System with alternate spinning fans RGB Fusion 2.0 Protection metal back plate LHR (Lite Hash Rate) version |
| Form Factor | ATX |
| Max GPU Length | 286 mm |
| Card Dimensions (L x H) | 11.26" x 4.53" |
| Slot Width | 2.5 Slot |
| 배송 무게 | 1.54 kg |
| 포장 크기 | 406 × 238 × 90 mm |
The WINDFORCE 3X system uses three alternate-spinning fans and a metal back-plate to move heat away from the GPU while it operates at the rated 220W thermal design power.
The board requires one 6-pin and one 8-pin PCIe power connector from the power supply.
Yes, the card is backward compatible and will run at PCIe 3.0 speeds when installed in a PCIe 3.0 slot.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?