저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with gold edge connector and silver SATA port

GLOTRENDS

GLOTRENDS PA09-SA M.2 SATA Adapter expansion card

SKU CH-CB4Y-B1ZJ7

Adds a SATA port for M.2 SATA SSDs using a PCIe x1 slot, includes brackets and cable

  • TypePCIe expansion card

Option M.2 SATA Adapter

  • M.2 PCIe X1 Adapter
  • M.2 SATA Adapter

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Converts M.2 SATA SSD to motherboard SATA port using Key B/B+M drives only
  • Fits PCIe X1/X4/X8/X16 slots drawing 3.3 V power from the bus
  • Works with SATA I/II/III — reach 6 Gbps when the motherboard port is SATA III
  • Boots from M.2 SATA SSD on Windows, Linux or Mac without extra drivers
  • Ships with full-height and low-profile brackets plus SATA III cable and M.2 screws

Product Identity

The GLOTRENDS PA09-SA is a PCIe expansion card that converts a single M.2 SATA solid-state drive into a standard SATA connection on the motherboard. It draws power from a PCIe x1 lane at 3.3 V and fits x1, x4, x8 or x16 slots. Both a regular bracket and a low-profile bracket are included along with a SATA III cable and mounting screw. The adapter works with Windows, Linux and Mac OS without extra drivers and allows booting from the installed drive.

Who It Fits

Builders who have an M.2 SATA module with Key B or B+M notching and want to connect it through a free SATA port will find this card a direct fit. It suits upgrades on older boards that lack an M.2 slot and deployments in 2U servers using the low-profile bracket. Not for users who need to connect M.2 PCIe Key M drives or who require more than one M.2 device on a single card.

Deciding Specification

The card accepts only M.2 SATA SSDs with Key B or B+M pinouts; M.2 PCIe Key M drives are not supported. The host motherboard must provide a SATA III port to reach 6 Gbps throughput. A PCIe x1 lane supplies 3.3 V power to the adapter.

주요 특징

  • Converts M.2 SATA SSD to motherboard SATA port using Key B/B+M drives only
  • Fits PCIe X1/X4/X8/X16 slots drawing 3.3 V power from the bus
  • Works with SATA I/II/III — reach 6 Gbps when the motherboard port is SATA III
  • Boots from M.2 SATA SSD on Windows, Linux or Mac without extra drivers
  • Ships with full-height and low-profile brackets plus SATA III cable and M.2 screws

사양

BrandGLOTRENDS
ModelPA09-SA
TypePCIe expansion card

이 상품에 대한 질문

What M.2 SSD key types does the PA09-SA accept?

The PA09-SA accepts M.2 SATA SSDs with Key B or Key B+M; it does not support Key M PCIe drives.

Will the card fit in a PCIe 4.0 x16 slot on my current motherboard?

Yes, the card draws 3.3 V power from any PCIe x1, x4, x8 or x16 slot, including PCIe 4.0 versions.

How can I confirm the adapter is delivering SATA III 6 Gbps after installation?

Verify the motherboard SATA port is SATA III, then check the drive negotiates 6 Gbps in the OS disk utility.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.