저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

HYTE

HYTE CS-HYTE-X50A-BB ATX Mid-Tower PC Case Black

SKU CH-Q45N-407C0 MPN CS-HYTE-X50A-BB

ATX mid-tower case with full-coverage micro-mesh intake and louvered blade exhaust for low-resistance airflow

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialABS / Steel
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Side PanelMesh Panel
  • Dust FiltersBottom

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Full-coverage micro-mesh intake lowers resistance for cooler, quieter operation
  • Patent-pending louvered blade ventilation cuts exhaust impedance while stiffening the frame
  • Cold-floor cooling directs up to 360 mm of fresh air straight to the graphics card
  • Structural PSU canopy with tie-down points and velcro straps simplifies cable routing
  • Supports ATX, E-ATX, Micro-ATX and ITX boards with 170 mm CPU cooler clearance

Modern airflow ATX mid-tower

The HYTE X50 Air is an ATX mid-tower case built for modern performance cooling. It supports ATX, E-ATX, Micro-ATX and ITX motherboards. The full-coverage micro-mesh side panel and louvered blade ventilation create low-resistance intake and exhaust paths. A structural PSU canopy at the top enables gravity-assisted cable routing with included velcro straps.

Thermals noise and power draw in normal use

The chassis accepts up to seven 120 mm fans across front, side and rear mounts, though none are pre-installed. Cold-floor cooling directs up to 360 mm of fresh intake air straight to the graphics card. Maximum CPU cooler height is 170 mm. Dust filters on the bottom protect internal components from debris during operation.

What the bundled accessories change

The package includes velcro straps positioned both inside and outside the chassis for meticulous cable management. The structural PSU canopy provides dedicated tie-down points that keep power cables organised and out of the airflow path. No fans or drive brackets beyond the listed 3.5 inch and 2.5 inch bays are supplied.

주요 특징

  • Full-coverage micro-mesh intake lowers resistance for cooler, quieter operation
  • Patent-pending louvered blade ventilation cuts exhaust impedance while stiffening the frame
  • Cold-floor cooling directs up to 360 mm of fresh air straight to the graphics card
  • Structural PSU canopy with tie-down points and velcro straps simplifies cable routing
  • Supports ATX, E-ATX, Micro-ATX and ITX boards with 170 mm CPU cooler clearance

사양

BrandHYTE
ModelCS-HYTE-X50A-BB
TypeATX Mid Tower
ColorBlack
Case MaterialABS / Steel
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Side PanelMesh Panel
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Pre-installed FansNo Fan Installed
Max CPU Cooler Height170 mm
배송 무게12.32 kg
포장 크기599 × 597 × 343 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the side mesh panel and what step do builders often miss?

The side panel uses full-coverage micro-mesh that lifts off after removing the rear thumbscrews; the step most miss is re-seating the panel flush so the louvered blade ventilation aligns with the exhaust path.

What maintenance will the dust filters need later?

Only a bottom dust filter is fitted; pull it out through the front, rinse or vacuum the mesh, dry it fully, then slide it back to keep the low-resistance intake clear.

What thermal limit appears first when the GPU runs sustained loads?

The CPU cooler height limit of 170 mm caps the tower cooler you can fit, so the processor temperature ceiling arrives before the 360 mm side intake can be fully utilised.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.