ICY DOCK MB411SPO-B 2.5" SATA/SAS HDD/SSD mobile rack
- Black
- SATA I/II/III
ICY DOCK
Mounts one 2.5" SATA drive into a 3.5" bay using a removable metal tray with Eagle-Hook lock and SATA 6Gbps support
Model ToughArmors 1BAY
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
Option 1 x 3.5in
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
The ICY DOCK MB991SK-B is a full-metal mobile rack that installs a single 2.5" SATA hard drive or SSD into an external 3.5" floppy bay. It supports drives from 5 mm to 15 mm thick and uses the rugged EZ Slide Mini Tray with an Eagle-Hook lock and metal safeguard key for secure retention. A single SATA 15-pin connector powers the entire unit and the tray enables quick swaps between compatible ToughArmor enclosures.
This rack suits system integrators and enthusiasts who want hot-swap convenience for a 2.5" SATA drive without occupying a 5.25" bay or internal 3.5" mount. It is not suitable for M.2 or U.2 form factors, nor for configurations that require more than one drive in the same bay. Users without an accessible external 3.5" opening should consider a different mounting solution.
The host connection is a single 7-pin SATA port that delivers up to 6 Gbps transfer rates, limited only by the installed drive's own speed. No additional controller or adapter is needed; the rack passes the native SATA I, II or III signal directly to the motherboard or add-in card. This specification determines whether the enclosure matches the available header and the performance ceiling of the storage device.
| Brand | ICY DOCK |
|---|---|
| Model | MB991SK-B |
| Color | Black |
| Conversion Tray | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Specifications | Host Interface : Single 7pin SATA Drive Fit : Single 2.5" SATA I/ II/ III HDD/ SSD (7-15mm Height Drive) Drive Bay : 3.5" floppy drive bay Transfer Rate : Up to 6 Gb/sec. (depending on hard drive speed) Power Input : Single 15pin SATA power port Insert& Extract connection Via : Direct SATA hard drive connection Structure : Full Metal Drive Cooling : Metal heat dispersion LED Indication : Device Power & Drive Activity LED Color : Green : Device Power ; Amber : Drive Activity Dimension (L x W x H) : 5.32" x 4.00" x 1.01" Weight : 0.88 lbs |
| 배송 무게 | 0.46 kg |
| 포장 크기 | 152 × 114 × 36 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The MB991SK-B is the rack and tray only; you supply your own 2.5" SATA HDD or SSD.
The rack supports all three SATA generations through the same 7-pin connector; pick any 2.5" SATA drive and it will run at its rated speed.
It is the ceiling of the SATA III link; actual throughput depends on the drive you fit and the host controller.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?