Intel Optane SSD 905P 1.5TB 2.5" U.2 PCIe NVMe 3.0 x4 internal SSD SSDPE21D015TAX1
- Internal Solid Stat…
- Consumer
Intel
An add-in card SSD using 3D XPoint memory for 1.5TB capacity with PCIe 3.0 x4 interface delivering 2600 MBps read and 2200 MBps write speeds
Options 1.5TB AIC
The Intel Optane 905P 1.5TB add-in-card SSD is built for desktop and workstation users who need consistently low latency. It uses 3D XPoint memory and a PCIe NVMe 3.0 x4 interface to deliver up to 2600 MBps sequential read and 2200 MBps sequential write speeds. Random performance reaches 575,000 read IOPS and 550,000 write IOPS at 4KB. Both read and write latency are rated at 10 µs.
The drive connects through a PCIe NVMe 3.0 x4 slot, so maximum throughput is bounded by that generation's signalling rate. Sustained workloads will not exceed the 2600 MBps read or 2200 MBps write ceilings, and random IOPS top out at the quoted 575,000 and 550,000 figures. Active power draw reaches 18.6W while idle consumption sits at 6.2W, which the host slot and system cooling must accommodate.
Moving from a conventional NAND-based NVMe SSD to this Optane 905P replaces variable latency with a steady 10 µs figure for both reads and writes. The jump is most valuable for workloads sensitive to tail latency, such as database logging, real-time analytics or high-queue-depth virtualisation. Endurance is rated at 1,600,000 hours MTBF, reflecting the durability of the 3D XPoint medium.
| Brand | Intel |
|---|---|
| Series | Optane SSD 905P Series |
| Model | SSDPED1D015TAX1 |
| Part Number | SSDPED1D015TAX1 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | AIC |
| Capacity | 1.5TB |
| Memory Components | 3D XPoint |
| Interface | PCIe NVMe 3.0 x4 |
| Controller | Intel |
| Max Sequential Read | Up to 2600 MBps |
| Max Sequential Write | Up to 2200 MBps |
| 4KB Random Read | Up to 575,000 IOPS |
| 4KB Random Write | Up to 550,000 IOPS |
| Read Latency | 10 µs |
| Write Latency | 10 µs |
| MTBF | 1,600,000 hours |
| Power Consumption (Idle) | 6.2W |
| Power Consumption (Active) | 18.6W |
| Operating Temperature | 0°C ~ +85°C |
| Max Shock Resistance | 50G (11 ms) |
| Max Vibration Resistance | Operating: 2.17 GRMS (5-700 Hz) Non-Operating: 3.13 GRMS (5-800 Hz) |
| Height | 2.000 |
| Width | 7.100 |
| Weight | 230.00g |
| 배송 무게 | 0.91 kg |
| 포장 크기 | 305 × 229 × 102 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The drive uses a PCIe 3.0 x4 add-in card form factor, so you need a full-height x4 or x16 slot and enough physical clearance for a half-length card.
The card draws up to 18.6 W under load and 6.2 W at idle, powered entirely from the PCIe slot, so any modern PSU with a free x4 or x16 slot will supply it.
Those 4 KB random figures mean very low 10 µs latency for both reads and writes, giving snappy response in heavy multitasking, database work and content creation.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?