Intel D3-S4510 SSDSC2KB480G801 480GB 2.5" SATA enterprise SSD
- 2.5"
- 480GB
Intel
2.5-inch SATA enterprise SSD with 240GB 3D NAND TLC, 560 MBps read, 280 MBps write, 90,000 IOPS random read, 16,000 IOPS random write, AES 256-bit encryption.
The Intel D3-S4510 240 GB 2.5-inch SATA III drive is built for servers that replace mechanical disks with solid-state storage. It targets read-heavy workloads such as web serving, content delivery and virtualised boot volumes where consistent latency matters more than peak write throughput.
Sequential reads reach 560 MB/s while writes top out at 280 MB/s, and the controller maintains 90,000 random read IOPS alongside 16,000 random write IOPS under steady state. Latency stays at 36 µs read and 37 µs write, and the 0.9 PBW endurance rating reflects the TLC NAND design for read-intensive duty cycles.
The drive drops into existing SATA 6 Gb/s backplanes and RAID controllers without firmware changes, letting operators retire 2.5-inch HDDs while keeping cabling and power budgets intact. Enhanced power-loss data protection, AES 256-bit encryption and temperature logging preserve data integrity during the migration, making the switch worthwhile when reliability and lower operating cost outweigh the need for maximum write speed.
| Brand | Intel |
|---|---|
| Series | D3-S4510 |
| Model | SSDSC2KB240G801 |
| Form Factor | 2.5" |
| Capacity | 240GB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 280 MBps |
| 4KB Random Read | Up to 90,000 IOPS |
| 4KB Random Write | Up to 16,000 IOPS |
| Read Latency | 36 µs |
| Write Latency | 37 µs |
| MTBF | 2,000,000 hours |
| Features | Endurance Rating (Lifetime Writes): 0.9 PBW Enhanced Power Loss Data Protection: Yes Hardware Encryption: AES 256 bit Temperature Monitoring and Logging: Yes End-to-End Data Protection: Yes Compatible with existing SATA setups for an easy storage upgrade Up to 6x lower power1 and lower cooling1 requirements than 2.5-inch HDDs 3.2x more data in the same amount of space Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements Up to 300x more IOPS/TB than HDDs |
| Power Consumption (Idle) | 1.0W |
| Power Consumption (Active) | 2.4W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| Height | 7.00mm |
| 배송 무게 | 0.45 kg |
| 포장 크기 | 305 × 229 × 102 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Active power draw is 2.4W and idle power is 1.0W. The drive is rated for 0°C to 70°C operating temperature with temperature monitoring and logging built in.
A standard 2.5-inch drive bay with a SATA 6Gb/s data connector and a SATA power connector. No extra cables, adapters or RAID cards are required beyond the normal SATA infrastructure.
Yes. The drive uses the same SATA III 6Gb/s interface and 2.5-inch form factor as legacy HDDs, and Intel firmware is designed for drop-in compatibility with existing SATA setups.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?