KingSpec NXM-512 512GB M.2 2242 NVMe internal SSD
- Internal Solid Stat…
- Consumer
KingSpec
A 1 TB M.2 2280 NVMe SSD with PCIe 3.0 x4 interface, reaching 3500 MBps read and 3200 MBps write speeds
Options NX-1TB-2280
The KingSpec NX-1TB 2280 is an internal NVMe solid-state drive built for consumers who want faster boot times and application loading on a desktop or laptop. It uses a PCI-Express 3.0 x4 interface with the NVMe 1.3 protocol and 3D NAND flash. Sequential reads reach up to 3500 MBps and writes up to 3200 MBps, while random performance hits 380,000 read IOPS and 320,000 write IOPS. Active power draw is 4.66 W and idle drops to 0.71 W.
Moving from a SATA SSD to this PCIe 3.0 x4 NVMe drive can deliver up to five times the sequential throughput, cutting game load screens and large-file transfer times. The jump is worth it when the motherboard has an M.2 slot wired for PCIe 3.0 x4 and the workload involves frequent large reads or writes. Endurance is rated at 480 TBW with an MTBF of 1,000,000 hours, so the drive sustains heavy daily writes for years.
Installation requires a standard M.2 2280 slot keyed for NVMe; the drive ships without a heatsink, so airflow from the chassis or motherboard cover is needed for sustained loads. The compact form factor leaves 2.5-inch bays free for additional storage and keeps cabling minimal. Low idle power helps laptop battery life, while the 1 TB capacity holds operating system, applications and a working project library in one volume.
| Brand | KingSpec |
|---|---|
| Series | NX Series |
| Model | NX-1TB 2280 |
| Part Number | NX-1TB 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3200 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 320,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.71W |
| Power Consumption (Active) | 4.66W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The drive uses the standard M.2 2280 form factor without a heatsink, so it fits any PCIe 3.0 x4 NVMe 1.3 slot on desktops, laptops or NVMe-enabled NAS units.
Set the M.2 slot to PCIe 3.0 x4 and NVMe mode in BIOS; the common mistake is leaving the slot in SATA or Auto mode, which prevents the drive from being detected.
The 480 TBW rating means you can write 480 terabytes before the warranty limit; typical consumer workloads write far less per year, so the drive lasts many years under normal use.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?