저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green rectangular M.2 2242 circuit board with black chips, no heatsink

KingSpec

KingSpec NXM-2TB M.2 2242 2TB PCIe 3.0 x4 NVMe 1.3 internal SSD

SKU CH-K0CM-7YK5C

M.2 2242 2 TB PCIe 3.0 x4 NVMe 1.3 SSD with 3D NAND, up to 3500 MB/s read and 3000 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4

Options NXM-2TB 2242

  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

Capacity and form factor

The KingSpec NXM-2TB is an M.2 2242 internal SSD with 2 TB of 3D NAND storage. It connects through a PCIe 3.0 x4 interface and follows the NVMe 1.3 specification. The drive fits ultrabooks, laptops, desktops and all-in-one systems that accept a 2242 M-key module.

Everyday headroom

Sequential reads reach 3500 MB/s and writes reach 3000 MB/s, while random 4 KB performance hits 330,000 read IOPS and 250,000 write IOPS. The 1000 TBW endurance rating supports heavy daily workloads, though sustained writes will eventually throttle once the SLC cache fills.

Thermals and power

Without a heatsink the controller relies on the motherboard thermal pad and airflow inside the chassis. Idle power sits at 0.61 W and active power at 3.6 W, keeping temperatures within the 0 °C to 75 °C operating range during typical workloads.

주요 특징

  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

사양

BrandKingSpec
SeriesNXM Series
ModelNXM-2TB
Part NumberNXM-2TB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
Max Sequential ReadUp to 3500 MBps
Max Sequential WriteUp to 3000 MBps
4KB Random ReadUp to 330,000 IOPS
4KB Random WriteUp to 250,000 IOPS
Terabytes Written (TBW)1000TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Power Consumption (Idle)0.61W
Power Consumption (Active)3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +75°C
Operating Humidity5% to 95% RH non-condensing
Height42.00mm
Width22.00mm
Depth3.50mm
Weight45g

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the NXM-2TB fit in a laptop that only has an M.2 2280 slot?

No — the drive is built to the M.2 2242 form factor measuring 42.0 mm long, so it cannot occupy a 2280-length socket.

How can I verify the NXM-2TB is delivering its rated 3500 MB/s sequential read and 3000 MB/s sequential write after installation?

Run a synthetic benchmark such as CrystalDiskMark on an NVMe 1.3-compatible PCIe 3.0 x4 slot; results should approach the stated 3500 MB/s read and 3000 MB/s write figures.

Does the NXM-2TB package include a heatsink or mounting screw, or must I source them separately?

The drive ships without a heatsink and without a mounting screw; both items need to be supplied by the user or the host device.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.