Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

KingSpec

KingSpec NXM-2TB M.2 2242 2TB PCIe 3.0 x4 NVMe 1.3 internal SSD

SKU CH-K0CM-7YK5C

M.2 2242 2 TB PCIe 3.0 x4 NVMe 1.3 SSD with 3D NAND, up to 3500 MB/s read and 3000 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4
  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

Capacity and form factor

The KingSpec NXM-2TB is an M.2 2242 internal SSD with 2 TB of 3D NAND storage. It connects through a PCIe 3.0 x4 interface and follows the NVMe 1.3 specification. The drive fits ultrabooks, laptops, desktops and all-in-one systems that accept a 2242 M-key module.

Everyday headroom

Sequential reads reach 3500 MB/s and writes reach 3000 MB/s, while random 4 KB performance hits 330,000 read IOPS and 250,000 write IOPS. The 1000 TBW endurance rating supports heavy daily workloads, though sustained writes will eventually throttle once the SLC cache fills.

Thermals and power

Without a heatsink the controller relies on the motherboard thermal pad and airflow inside the chassis. Idle power sits at 0.61 W and active power at 3.6 W, keeping temperatures within the 0 °C to 75 °C operating range during typical workloads.

Přednosti

  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

Specifikace

BrandKingSpec
SeriesNXM Series
ModelNXM-2TB
Part NumberNXM-2TB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
Max Sequential ReadUp to 3500 MBps
Max Sequential WriteUp to 3000 MBps
4KB Random ReadUp to 330,000 IOPS
4KB Random WriteUp to 250,000 IOPS
Terabytes Written (TBW)1000TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Power Consumption (Idle)0.61W
Power Consumption (Active)3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +75°C
Operating Humidity5% to 95% RH non-condensing
Height42.00mm
Width22.00mm
Depth3.50mm
Weight45g

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the NXM-2TB fit in a laptop that only has an M.2 2280 slot?

No — the drive is built to the M.2 2242 form factor measuring 42.0 mm long, so it cannot occupy a 2280-length socket.

How can I verify the NXM-2TB is delivering its rated 3500 MB/s sequential read and 3000 MB/s sequential write after installation?

Run a synthetic benchmark such as CrystalDiskMark on an NVMe 1.3-compatible PCIe 3.0 x4 slot; results should approach the stated 3500 MB/s read and 3000 MB/s write figures.

Does the NXM-2TB package include a heatsink or mounting screw, or must I source them separately?

The drive ships without a heatsink and without a mounting screw; both items need to be supplied by the user or the host device.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.