Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

KingSpec

KingSpec NXM-2TB M.2 2242 2TB PCIe 3.0 x4 NVMe 1.3 internal SSD

SKU CH-K0CM-7YK5C

M.2 2242 2 TB PCIe 3.0 x4 NVMe 1.3 SSD with 3D NAND, up to 3500 MB/s read and 3000 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4
  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

Capacity and form factor

The KingSpec NXM-2TB is an M.2 2242 internal SSD with 2 TB of 3D NAND storage. It connects through a PCIe 3.0 x4 interface and follows the NVMe 1.3 specification. The drive fits ultrabooks, laptops, desktops and all-in-one systems that accept a 2242 M-key module.

Everyday headroom

Sequential reads reach 3500 MB/s and writes reach 3000 MB/s, while random 4 KB performance hits 330,000 read IOPS and 250,000 write IOPS. The 1000 TBW endurance rating supports heavy daily workloads, though sustained writes will eventually throttle once the SLC cache fills.

Thermals and power

Without a heatsink the controller relies on the motherboard thermal pad and airflow inside the chassis. Idle power sits at 0.61 W and active power at 3.6 W, keeping temperatures within the 0 °C to 75 °C operating range during typical workloads.

I korthet

  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

Specifikationer

BrandKingSpec
SeriesNXM Series
ModelNXM-2TB
Part NumberNXM-2TB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
Max Sequential ReadUp to 3500 MBps
Max Sequential WriteUp to 3000 MBps
4KB Random ReadUp to 330,000 IOPS
4KB Random WriteUp to 250,000 IOPS
Terabytes Written (TBW)1000TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Power Consumption (Idle)0.61W
Power Consumption (Active)3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +75°C
Operating Humidity5% to 95% RH non-condensing
Height42.00mm
Width22.00mm
Depth3.50mm
Weight45g

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the NXM-2TB fit in a laptop that only has an M.2 2280 slot?

No — the drive is built to the M.2 2242 form factor measuring 42.0 mm long, so it cannot occupy a 2280-length socket.

How can I verify the NXM-2TB is delivering its rated 3500 MB/s sequential read and 3000 MB/s sequential write after installation?

Run a synthetic benchmark such as CrystalDiskMark on an NVMe 1.3-compatible PCIe 3.0 x4 slot; results should approach the stated 3500 MB/s read and 3000 MB/s write figures.

Does the NXM-2TB package include a heatsink or mounting screw, or must I source them separately?

The drive ships without a heatsink and without a mounting screw; both items need to be supplied by the user or the host device.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.