暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular M.2 2242 circuit board with black chips, no heatsink

KingSpec

KingSpec NXM-2TB M.2 2242 2TB PCIe 3.0 x4 NVMe 1.3 internal SSD

SKU CH-K0CM-7YK5C

M.2 2242 2 TB PCIe 3.0 x4 NVMe 1.3 SSD with 3D NAND, up to 3500 MB/s read and 3000 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4

Options NXM-2TB 2242

  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

Capacity and form factor

The KingSpec NXM-2TB is an M.2 2242 internal SSD with 2 TB of 3D NAND storage. It connects through a PCIe 3.0 x4 interface and follows the NVMe 1.3 specification. The drive fits ultrabooks, laptops, desktops and all-in-one systems that accept a 2242 M-key module.

Everyday headroom

Sequential reads reach 3500 MB/s and writes reach 3000 MB/s, while random 4 KB performance hits 330,000 read IOPS and 250,000 write IOPS. The 1000 TBW endurance rating supports heavy daily workloads, though sustained writes will eventually throttle once the SLC cache fills.

Thermals and power

Without a heatsink the controller relies on the motherboard thermal pad and airflow inside the chassis. Idle power sits at 0.61 W and active power at 3.6 W, keeping temperatures within the 0 °C to 75 °C operating range during typical workloads.

特長

  • Up to 3500 MB/s sequential read for fast boot and load times
  • Up to 3000 MB/s sequential write to accelerate large file saves
  • 330,000 random read IOPS for responsive multitasking
  • 250,000 random write IOPS for smooth application performance
  • 1,000 TBW endurance rating for long-term reliability

仕様

BrandKingSpec
SeriesNXM Series
ModelNXM-2TB
Part NumberNXM-2TB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
Max Sequential ReadUp to 3500 MBps
Max Sequential WriteUp to 3000 MBps
4KB Random ReadUp to 330,000 IOPS
4KB Random WriteUp to 250,000 IOPS
Terabytes Written (TBW)1000TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Power Consumption (Idle)0.61W
Power Consumption (Active)3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +75°C
Operating Humidity5% to 95% RH non-condensing
Height42.00mm
Width22.00mm
Depth3.50mm
Weight45g

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the NXM-2TB fit in a laptop that only has an M.2 2280 slot?

No — the drive is built to the M.2 2242 form factor measuring 42.0 mm long, so it cannot occupy a 2280-length socket.

How can I verify the NXM-2TB is delivering its rated 3500 MB/s sequential read and 3000 MB/s sequential write after installation?

Run a synthetic benchmark such as CrystalDiskMark on an NVMe 1.3-compatible PCIe 3.0 x4 slot; results should approach the stated 3500 MB/s read and 3000 MB/s write figures.

Does the NXM-2TB package include a heatsink or mounting screw, or must I source them separately?

The drive ships without a heatsink and without a mounting screw; both items need to be supplied by the user or the host device.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。