저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Kingston Technology Corp.

Kingston Technology Corp. SEDC3000ME/7T6 7.68TB enterprise SSD

SKU CH-1GVH-CAC3P MPN SEDC3000ME/7T6

A 7.68 TB enterprise NVMe drive with PCIe 5.0 x4 interface delivering 14000 MBps read and 10000 MBps write speeds, 1 DWPD endurance and AES 256-bit encryption

  • Form Factor2.5" U.2
  • Capacity7.68TB
  • Memory Components3D eTLC
  • InterfacePCI-Express 5.0 x4
  • Max Sequential ReadUp to 14000 MBps
  • Max Sequential WriteUp to 10000 MBps

Options 7.68TB

  • Delivers up to 14000 MBps sequential read speed for demanding workloads
  • Sustains up to 10000 MBps sequential write throughput for heavy write tasks
  • Handles up to 2800000 random read IOPS for low-latency data access
  • Protects data with AES 256-bit encryption and TCG Opal 2.0 compliance
  • Rated for 14016 TB written endurance over the drive lifetime

Enterprise SSD for data-centre workloads

The Kingston SEDC3000ME/7T6 is a 2.5" U.2 enterprise SSD built for server and data-centre environments. It targets applications that demand sustained throughput and hardware-based encryption. The drive suits AI, HPC, cloud services and edge computing deployments. Buyers needing a consumer form factor or lower endurance should look elsewhere.

PCI-Express 5.0 x4 interface

The drive connects through a PCI-Express 5.0 x4 link, delivering up to 14000 MBps sequential read and 10000 MBps sequential write. Random performance reaches 2800000 IOPS read and 500000 IOPS write with read latency below 10 µs and write latency below 70 µs. This interface is the single specification that decides compatibility.

Fits 2.5" U.2 bays with PLP and AES 256-bit

The 2.5" U.2 form factor slots into standard server backplanes and draws up to 24W during write operations. On-board power loss protection safeguards in-flight data while TCG Opal 2.0 and AES 256-bit encryption secure data at rest. No extra cabling or software layer is required for these features.

주요 특징

  • Delivers up to 14000 MBps sequential read speed for demanding workloads
  • Sustains up to 10000 MBps sequential write throughput for heavy write tasks
  • Handles up to 2800000 random read IOPS for low-latency data access
  • Protects data with AES 256-bit encryption and TCG Opal 2.0 compliance
  • Rated for 14016 TB written endurance over the drive lifetime

사양

BrandKingston
ModelSEDC3000ME/7T6
Form Factor2.5" U.2
Capacity7.68TB
Memory Components3D eTLC
InterfacePCI-Express 5.0 x4
Max Sequential ReadUp to 14000 MBps
Max Sequential WriteUp to 10000 MBps
4KB Random ReadUp to 2,800,000 IOPS
4KB Random WriteUp to 500,000 IOPS
Read Latency<10 µs
Write Latency< 70 µs
Endurance1 DWPD
Terabytes Written (TBW)14016TB
MTBF2,000,000 hours
SecurityTCG Opal 2.0, AES 256-bit encryption
Power Consumption (Idle)8W
Power Consumption (Active)Max Read: 8.2W
Max Write: 24W
Operating Temperature0°C ~ +70°C
Max Vibration Resistance10G Peak (10-1000Hz)
Height14.8mm
Width100.5mm
Depth69.8mm
Weight151.3g
배송 무게0.18 kg
포장 크기184 × 130 × 15 mm

이 모델의 다른 버전

같은 라인업에서 2개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How does the 14000 MBps sequential read speed translate in a server workload?

The 14000 MBps read and 10000 MBps write figures are maximum sequential throughput; real-world sustained speeds depend on queue depth, block size and controller firmware tuning.

What does the PCI-Express 5.0 x4 interface limit in practice?

The PCIe 5.0 x4 link sets the electrical ceiling for NVMe command transport; the drive reaches its rated 14000 MBps read and 10000 MBps write within that link.

Will the 2.5 inch U.2 14.8 mm height fit my hot-swap bay?

The drive measures 100.5 mm wide, 69.8 mm deep and 14.8 mm high, matching the standard 2.5 inch U.2 form factor for hot-swap carriers.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.