저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 2.5 inch SATA enterprise SSD with label

Kingston Technology Corp.

Kingston Technology Corp. SEDC600ME/1920G 1.92TB enterprise SSD

SKU CH-0QJ5-AW1JG MPN SEDC600ME/1920G

A 2.5-inch SATA enterprise SSD with 1.92TB of 3D TLC storage, 560 MBps reads, 530 MBps writes, 1 DWPD endurance and AES 256-bit encryption

  • Form Factor2.5"
  • Capacity1.92TB
  • Memory Components3D TLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 560 MBps
  • Max Sequential WriteUp to 530 MBps

Options 1.92TB

  • 92TB capacity stores large datasets
  • SATA III interface delivers up to 560MB/s sequential read
  • 1 DWPD endurance with 3504TB written rating
  • AES 256-bit hardware encryption protects data
  • 2 million hour MTBF ensures long-term reliability

1.92 TB SATA enterprise SSD

The Kingston SEDC600ME/1920G is a 2.5-inch solid-state drive built for mixed-use data-centre workloads. Its 3D TLC NAND delivers 1.92 TB of capacity with 1 DWPD endurance and 3504 TBW. Hardware-based power-loss protection and AES 256-bit encryption protect data integrity in server and storage arrays.

Thermals noise and power draw

The drive operates between 0 °C and 70 °C with no moving parts, so it produces no acoustic noise. Idle power is 1.30 W, average active power is 1.45 W, while peak read and write draw reach 1.6 W and 3.6 W respectively. Vibration tolerance is rated at 2.17 G peak during operation.

Build integration and headroom

The 7 mm z-height fits standard 2.5-inch hot-plug bays and SATA backplanes without adapters. SATA III 600 MBps interface provides broad compatibility with existing RAID controllers and HBA cards. The 560 MBps sequential read and 530 MBps sequential write speeds leave headroom for mixed random workloads up to 94,000 read IOPS and 78,000 write IOPS.

주요 특징

  • 92TB capacity stores large datasets
  • SATA III interface delivers up to 560MB/s sequential read
  • 1 DWPD endurance with 3504TB written rating
  • AES 256-bit hardware encryption protects data
  • 2 million hour MTBF ensures long-term reliability

사양

BrandKingston
ModelSEDC600ME/1920G
Form Factor2.5"
Capacity1.92TB
Memory Components3D TLC
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 530 MBps
4KB Random ReadUp to 94,000 IOPS
4KB Random WriteUp to 78,000 IOPS
Read Latency<130 us
Write Latency<70 us
Endurance1 DWPD
Terabytes Written (TBW)3504TB
MTBF2,000,000 hours
Power Consumption (Idle)1.30W
Power Consumption (Active)Average: 1.45W
Max Read: 1.6W
Max Write: 3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Vibration Resistance2.17G Peak (7-800Hz) operating
20G Peak (10-2000Hz) non-operating
Height7mm
Width100mm
Depth69.9mm
Weight92.34g
배송 무게0.45 kg
포장 크기178 × 127 × 76 mm

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How is the 2.5" SATA drive installed in a hot-plug server bay, and what step is often missed?

Slide the drive into the bay until the SATA connector seats firmly; the step often missed is engaging the bay's locking lever or screw so the drive cannot pull out under vibration.

What maintenance or replacement will the 1.92TB drive need after its rated write life?

The drive is rated for 3504TB written at 1 DWPD; once that endurance is reached the drive should be replaced to avoid data-loss risk.

What limit appears first during sustained heavy writes on this SATA SSD?

Sequential write speed caps at 530 MBps and the controller throttles to keep write latency below 70 us and temperature within the 0°C–70°C operating range.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.