저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 2.5 inch SATA enterprise SSD with label showing 3.84TB capacity

Kingston Technology Corp.

Kingston Technology Corp. SEDC600ME/3840G 3.84TB enterprise SSD

SKU CH-KA1X-RD7GP MPN SEDC600ME/3840G

A 2.5 inch SATA solid-state drive with 3.84 TB of 3D TLC storage, 560 MBps read and 530 MBps write speeds, 1 DWPD endurance and 256-bit AES encryption for data-centre workloads

  • Form Factor2.5"
  • Capacity3.84TB
  • Memory Components3D TLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 560 MBps
  • Max Sequential WriteUp to 530 MBps

Options 3.84TB

  • 84 TB capacity stores large data sets
  • SATA interface delivers up to 560 MBps sequential read
  • 1 DWPD endurance with 7008 TBW for mixed workloads
  • 256-bit AES encryption protects data at rest
  • 2,000,000 hours MTBF supports continuous operation

Capacity and interface

The Kingston SEDC600ME/3840G is a 3.84TB enterprise solid-state drive with a 2.5-inch form factor and a SATA III interface. It uses 3D TLC memory and is built for data-centre environments where consistent latency and hardware-based power-loss protection are required. AES 256-bit encryption secures data at rest.

Who this suits and who it does not

This drive fits servers and storage arrays that need mixed-use endurance of 1 DWPD and 7008 TBW, with sequential reads up to 560 MBps and writes up to 530 MBps. It also suits deployments that demand hot-plug capability and vibration resistance of 2.17G peak while operating. Buyers who need a PCIe interface or higher write endurance than 1 DWPD should look elsewhere.

Endurance metric

The single specification that decides fit is the 1 DWPD endurance rating backed by 7008 TBW, which defines how much data can be written each day over the warranty period.

주요 특징

  • 84 TB capacity stores large data sets
  • SATA interface delivers up to 560 MBps sequential read
  • 1 DWPD endurance with 7008 TBW for mixed workloads
  • 256-bit AES encryption protects data at rest
  • 2,000,000 hours MTBF supports continuous operation

사양

BrandKingston
ModelSEDC600ME/3840G
Form Factor2.5"
Capacity3.84TB
Memory Components3D TLC
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 530 MBps
4KB Random ReadUp to 94,000 IOPS
4KB Random WriteUp to 59,000 IOPS
Read Latency<130 us
Write Latency<70 us
Endurance1 DWPD
Terabytes Written (TBW)7008TB
MTBF2,000,000 hours
Power Consumption (Idle)1.30W
Power Consumption (Active)Average: 1.45W
Max Read: 1.6W
Max Write: 3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Vibration Resistance2.17G Peak (7-800Hz) operating
20G Peak (10-2000Hz) non-operating
Height7mm
Width100mm
Depth69.9mm
Weight92.34g
배송 무게0.45 kg
포장 크기178 × 127 × 76 mm

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 2.5" SATA III form factor fit in my existing server drive bay and backplane?

Yes, the drive uses a standard 2.5 inch 7 mm SATA III interface compatible with common server hot-swap bays and backplanes.

How do I confirm the drive delivers the rated 94,000 random read and 59,000 random write IOPS after installation?

Run a 4 KB random read and write test using a tool such as fio or CrystalDiskMark; sustained results should approach the published figures.

Does the package include a drive tray or mounting screws, or must I order them separately?

The drive ships as a bare 2.5 inch unit; any caddy, tray or screws required by your specific server chassis must be sourced separately.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.