저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Open-frame laser engraver with 3.5-inch touchscreen, 400 by 365 mm bed

LONGER

LONGER RAY5 20W Upgraded Laser Engraver 400×365mm

SKU CH-4MF3-8CB85

20 W laser engraver with a 400 × 365 mm work area, 0.08 × 0.1 mm spot, 3.5" touchscreen and four connection modes

  • TypeLaser Engraver

size RAY5 20W

  • Faster engraving and cutting with 20 W laser power
  • Ultra-fine 0.08 × 0.1 mm spot for sharp detail
  • 256-colour capability adds vivid contrast on metal and glass
  • 5″ colour touchscreen plus USB, TF card, Wi-Fi and app control
  • 400 × 365 mm work area handles large wood, acrylic and steel pieces

20 W Laser Engraver for Makers

The LONGER RAY5 is a 20 W diode laser engraver built for hobbyists and small workshops that need a single machine for engraving and cutting wood, acrylic, leather, paper, glass, plastics and thin stainless steel. It arrives new with all tools and a manual for quick assembly.

400 × 365 mm Work Area

The usable bed measures 400 mm by 365 mm, which decides whether a project fits without re-positioning. A 0.08 × 0.1 mm compressed spot and 256-colour greyscale give fine detail on metal, glass and wood.

Sustained 10 000 mm/min Throughput

The manufacturer rates continuous processing speed at 10 000 mm/min, lower than the 24 000 mm/min peak, so plan jobs around the sustained rate for consistent results over long runs. An air-assist port helps keep optics clean during extended cuts.

주요 특징

  • Faster engraving and cutting with 20 W laser power
  • Ultra-fine 0.08 × 0.1 mm spot for sharp detail
  • 256-colour capability adds vivid contrast on metal and glass
  • 5″ colour touchscreen plus USB, TF card, Wi-Fi and app control
  • 400 × 365 mm work area handles large wood, acrylic and steel pieces

사양

TypeLaser Engraver

이 모델의 다른 버전

같은 라인업에서 2개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 20 W laser power mean for cutting thickness on this engraver?

The 20 W output lets the machine cut 25 mm wood and 35 mm acrylic in a single pass, and it can cut 0.05 mm stainless steel.

How do the USB, TF card, Wi-Fi and app connections limit file transfer or job control?

All four modes let you send jobs directly to the 3.5" touchscreen controller; the machine then runs the file offline so transfer speed does not affect engraving quality.

What bench space and mounting points does the 400×365 mm work area require?

The frame needs a flat surface at least 400 mm by 365 mm plus clearance for the gantry rails and the built-in touchscreen housing.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.