저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
LDX-218 digital servo with metal gear housing and output shaft

LORDWORLD

LORDWORLD LDX-218 17kg Digital Servo 180°

SKU CH-FKWZ-PVBE1

A digital servo delivering 17 kg·cm torque at 7.4 V with full metal gears, dual ball bearings and 180° rotation for robot builds

  • High torque of 17 kg·cm at 7.4 V powers demanding robot joints
  • Full metal gear train increases accuracy and extends service life
  • Dual ball bearings with drive and support roles deliver smooth, stable rotation
  • High-precision potentiometer improves linearity for accurate 180° movement
  • Plug-in wire design removes desoldering and speeds up servo replacement

17 kg·cm Torque Servo for Robotics

The LORDWORLD LDX-218 is a standard digital servo built for robotics projects that demand strong, precise actuation. It delivers 15 kg·cm of torque at 6.6 V and 17 kg·cm at 7.4 V, making it suitable for articulated arms, legged platforms and steering mechanisms. Full metal gears and dual ball bearings provide the mechanical rigidity needed for repeated load cycles. The 180° control angle covers the range required by most joint designs.

Capacity and Headroom

At 6.6 V the servo produces 15 kg·cm (208 oz·in), rising to 17 kg·cm (236 oz·in) at 7.4 V, giving a clear voltage-dependent headroom for peak loads. The high-precision potentiometer improves linearity so positional commands remain accurate across the full 180° sweep. It is not intended for continuous rotation or multi-turn applications, and the fixed travel limit prevents use in winch or endless-rotation roles.

Thermals, Noise and Power Draw

Metal gear construction and dual ball bearings reduce internal friction, helping to limit heat build-up during normal intermittent operation. Audible gear noise is typical for metal-gear servos under load but remains consistent with standard digital servo behaviour. Current draw scales with torque demand, so a supply capable of delivering several amps at 6.6–7.4 V is required to maintain voltage under stall conditions.

주요 특징

  • High torque of 17 kg·cm at 7.4 V powers demanding robot joints
  • Full metal gear train increases accuracy and extends service life
  • Dual ball bearings with drive and support roles deliver smooth, stable rotation
  • High-precision potentiometer improves linearity for accurate 180° movement
  • Plug-in wire design removes desoldering and speeds up servo replacement

사양

BrandLORDWORLD

이 상품에 대한 질문

Will the LDX-218 digital servo connect directly to my existing PWM receiver or flight controller without an adapter?

The servo uses a standard three-pin plug-in wire that fits common PWM receivers and flight controllers, so no adapter is needed for typical hobby connections.

How can I verify the LDX-218 is delivering its rated 17 kg·cm torque at 7.4 V after installation?

Command the servo to hold a known load at mid-stroke; if it maintains position without stalling or overheating, the 17 kg·cm rating at 7.4 V is being met.

Does the LDX-218 package include mounting horns, screws or a power supply, or must I buy them separately?

The box contains the servo with its pre-fitted plug-in lead only; mounting horns, screws and a 6.6–7.4 V power source are not included.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.