저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with black Ethernet jack and 40-pin header

LORDWORLD

LORDWORLD PoE HAT (H) for Raspberry Pi 5 / CM 5 development board

SKU CH-ZYRP-XE8YP

A Power-over-Ethernet HAT supplying 5 V 5 A to Raspberry Pi 5 or CM 5 via a single cable while fitting the official case and active cooler

  • Powers Raspberry Pi 5 via single Ethernet cable using IEEE 802.3 af/at standard
  • Delivers 5 V 5 A output through isolated switched-mode supply for stable operation
  • Fits standard 40-pin GPIO header for direct attachment to Raspberry Pi 5 or CM 5
  • Compatible with official Raspberry Pi 5 case for enclosed deployment
  • Works alongside official active cooler to maintain thermal performance

PoE HAT for Raspberry Pi 5 and CM 5

The LORDWORLD PoE HAT (H) is an expansion board that adds Power over Ethernet to a Raspberry Pi 5 or Compute Module 5. It draws power and data from a single Ethernet cable, removing the need for a separate USB-C power supply. The board is aimed at makers and engineers who want a tidy, cable-free deployment for headless or embedded projects.

Installation uses the standard 40-pin GPIO header

The HAT sits directly on the 40-pin GPIO header and is designed to fit inside the official Raspberry Pi 5 case. It also works alongside the official active cooler, so thermal performance is not compromised. The only common issue is ensuring the PoE switch or injector actually supports the 802.3af/at standard; non-standard passive injectors will not power the board.

Delivers 5 V at up to 5 A over 802.3af/at

The isolated switched-mode supply provides 5 V 5 A, which is enough for the Raspberry Pi 5 plus typical USB peripherals such as SSDs or cameras. Heavy loads like multiple high-current USB devices or power-hungry HATs stacked on top can exceed the 5 A limit, causing voltage droop or brown-outs. In those scenarios a separate high-current power supply becomes necessary.

주요 특징

  • Powers Raspberry Pi 5 via single Ethernet cable using IEEE 802.3 af/at standard
  • Delivers 5 V 5 A output through isolated switched-mode supply for stable operation
  • Fits standard 40-pin GPIO header for direct attachment to Raspberry Pi 5 or CM 5
  • Compatible with official Raspberry Pi 5 case for enclosed deployment
  • Works alongside official active cooler to maintain thermal performance

사양

BrandLORDWORLD

이 상품에 대한 질문

How can I verify the 5V 5A output is active after connecting the PoE HAT (H) to my Raspberry Pi 5?

The Raspberry Pi 5 should boot normally and show stable voltage readings in the OS when powered through the PoE HAT (H) using a compliant 802.3af/at injector or switch.

What comes with the PoE HAT (H) and do I need a separate PoE injector or switch?

The board includes the PoE HAT (H) with a standard 40PIN GPIO header; a separate IEEE 802.3af/at compliant PoE injector or switch and Ethernet cable are required to deliver power and data.

Is the PoE HAT (H) the right choice for both a Raspberry Pi 5 and a Compute Module 5 development board?

Yes, the PoE HAT (H) is designed for the Raspberry Pi 5 and CM 5 development board, fitting the 40PIN GPIO header and working with the official case and active cooler.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.