저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Mushkin Enhanced

Mushkin Enhanced Tempest MKNSSDTS1TB-D8 1TB internal SSD

SKU CH-M3MS-RWMRC MPN MKNSSDTS1TB-D8

1TB M.2 2280 NVMe SSD with PCIe Gen3 x4 speeds up to 3300 MBps read and 2900 MBps write, 3D NAND, InnoGrit IG5216 controller, 500 TBW endurance and MEDS data protection

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCIe Gen3 x4 NVMe 1.4

Options 1TB

  • Fast boot and load times with up to 3300 MBps sequential read
  • Quick file saves and installs backed by up to 2900 MBps sequential write
  • Snappy multitasking from up to 344000 IOPS random read
  • Responsive apps and OS thanks to up to 343000 IOPS random write
  • Long-term reliability supported by 500 TBW endurance rating

1TB PCIe Gen3 x4 NVMe 1.4 SSD

The Mushkin Enhanced Tempest MKNSSDTS1TB-D8 is a 1TB internal solid state drive built for consumer desktops and laptops with an M.2 2280 slot. It uses 3D NAND flash and an InnoGrit IG5216 controller to deliver NVMe 1.4 performance for everyday computing and intensive workloads.

Sustained write behaviour

The drive is rated for up to 2900 MBps sequential write and 343000 IOPS random write, with 500TB total bytes written and 1500000 hours MTBF. MEDS data protection, fourth-generation LDPC ECC and end-to-end data path protection maintain integrity during long transfers and heavy multi-tasking.

Compatibility check

Verify your motherboard or laptop provides an M.2 2280 key-M slot wired for PCIe Gen3 x4 and NVMe 1.4 support. Confirm the BIOS or UEFI recognises NVMe boot drives and that a 1TB capacity fits your partition scheme and operating system requirements.

주요 특징

  • Fast boot and load times with up to 3300 MBps sequential read
  • Quick file saves and installs backed by up to 2900 MBps sequential write
  • Snappy multitasking from up to 344000 IOPS random read
  • Responsive apps and OS thanks to up to 343000 IOPS random write
  • Long-term reliability supported by 500 TBW endurance rating

사양

BrandMushkin Enhanced
SeriesTempest
ModelMKNSSDTS1TB-D8
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCIe Gen3 x4 NVMe 1.4
ProtocolNVMe 1.4
ControllerInnoGrit IG5216
Max Sequential ReadUp to 3300 MBps
Max Sequential WriteUp to 2900 MBps
4KB Random ReadUp to 344,000 IOPS
4KB Random WriteUp to 343,000 IOPS
Seek Time< 0.1 ms
Terabytes Written (TBW)500TB
MTBF1,500,000 hours
FeaturesMEDS (Mushkin Enhanced Data-protection Suite) ensures valuable data is protected
- Built-in 4th Generation LDPC ECC provides the most-powerful data correction level in use today
- End-to-end data path protection
- SLC Caching
- Data shaping increases endurance
- StaticDataRefresh ensures data integrity
- Global wear-leveling evens program/erase counts across data blocks to extend lifespan
Enhanced Power Management
NVMe Security Erase support
NVMe Deallocate function support (NVMe equivalent of TRIM command)
High-reliability 3D NAND flash
S.M.A.R.T. support
Temperature sensor
RoHS, FC
Power Consumption (Idle)0.3W
Power Consumption (Active)3.75W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G
Height3.80mm
Width22.00mm
Depth80.00mm
Weight7.00g
배송 무게0.01 kg
포장 크기127 × 51 × 18 mm

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the 0.3 W idle draw keep the MKNSSDTS1TB-D8 cool during all-day workloads?

The drive idles at 0.3 W and uses the InnoGrit IG5216 controller with a low-power design, so heat output stays minimal even under sustained PCIe Gen3 x4 NVMe 1.4 operation.

What motherboard slot is required for the M.2 2280 form factor of this Tempest SSD?

You need an M.2 2280 key-M slot wired for PCIe Gen3 x4 to run the drive at its rated 3300 MBps read and 2900 MBps write speeds.

Will the PCIe Gen3 x4 NVMe 1.4 interface work on an older board limited to PCIe Gen2 speeds?

The drive is backward compatible with PCIe Gen2 slots, but sequential reads will be capped below the advertised 3300 MBps and writes below 2900 MBps.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.