我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green M.2 2280 circuit board with black controller and gold edge connector

Mushkin Enhanced

Mushkin Enhanced Tempest MKNSSDTS1TB-D8 1TB internal SSD

SKU CH-M3MS-RWMRC MPN MKNSSDTS1TB-D8

1TB M.2 2280 NVMe SSD with PCIe Gen3 x4 speeds up to 3300 MBps read and 2900 MBps write, 3D NAND, InnoGrit IG5216 controller, 500 TBW endurance and MEDS data protection

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCIe Gen3 x4 NVMe 1.4

Options 1TB

  • Fast boot and load times with up to 3300 MBps sequential read
  • Quick file saves and installs backed by up to 2900 MBps sequential write
  • Snappy multitasking from up to 344000 IOPS random read
  • Responsive apps and OS thanks to up to 343000 IOPS random write
  • Long-term reliability supported by 500 TBW endurance rating

1TB PCIe Gen3 x4 NVMe 1.4 SSD

The Mushkin Enhanced Tempest MKNSSDTS1TB-D8 is a 1TB internal solid state drive built for consumer desktops and laptops with an M.2 2280 slot. It uses 3D NAND flash and an InnoGrit IG5216 controller to deliver NVMe 1.4 performance for everyday computing and intensive workloads.

Sustained write behaviour

The drive is rated for up to 2900 MBps sequential write and 343000 IOPS random write, with 500TB total bytes written and 1500000 hours MTBF. MEDS data protection, fourth-generation LDPC ECC and end-to-end data path protection maintain integrity during long transfers and heavy multi-tasking.

Compatibility check

Verify your motherboard or laptop provides an M.2 2280 key-M slot wired for PCIe Gen3 x4 and NVMe 1.4 support. Confirm the BIOS or UEFI recognises NVMe boot drives and that a 1TB capacity fits your partition scheme and operating system requirements.

商品特色

  • Fast boot and load times with up to 3300 MBps sequential read
  • Quick file saves and installs backed by up to 2900 MBps sequential write
  • Snappy multitasking from up to 344000 IOPS random read
  • Responsive apps and OS thanks to up to 343000 IOPS random write
  • Long-term reliability supported by 500 TBW endurance rating

商品規格

BrandMushkin Enhanced
SeriesTempest
ModelMKNSSDTS1TB-D8
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCIe Gen3 x4 NVMe 1.4
ProtocolNVMe 1.4
ControllerInnoGrit IG5216
Max Sequential ReadUp to 3300 MBps
Max Sequential WriteUp to 2900 MBps
4KB Random ReadUp to 344,000 IOPS
4KB Random WriteUp to 343,000 IOPS
Seek Time< 0.1 ms
Terabytes Written (TBW)500TB
MTBF1,500,000 hours
FeaturesMEDS (Mushkin Enhanced Data-protection Suite) ensures valuable data is protected
- Built-in 4th Generation LDPC ECC provides the most-powerful data correction level in use today
- End-to-end data path protection
- SLC Caching
- Data shaping increases endurance
- StaticDataRefresh ensures data integrity
- Global wear-leveling evens program/erase counts across data blocks to extend lifespan
Enhanced Power Management
NVMe Security Erase support
NVMe Deallocate function support (NVMe equivalent of TRIM command)
High-reliability 3D NAND flash
S.M.A.R.T. support
Temperature sensor
RoHS, FC
Power Consumption (Idle)0.3W
Power Consumption (Active)3.75W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G
Height3.80mm
Width22.00mm
Depth80.00mm
Weight7.00g
出貨重量0.01 kg
包裝尺寸127 × 51 × 18 mm

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 0.3 W idle draw keep the MKNSSDTS1TB-D8 cool during all-day workloads?

The drive idles at 0.3 W and uses the InnoGrit IG5216 controller with a low-power design, so heat output stays minimal even under sustained PCIe Gen3 x4 NVMe 1.4 operation.

What motherboard slot is required for the M.2 2280 form factor of this Tempest SSD?

You need an M.2 2280 key-M slot wired for PCIe Gen3 x4 to run the drive at its rated 3300 MBps read and 2900 MBps write speeds.

Will the PCIe Gen3 x4 NVMe 1.4 interface work on an older board limited to PCIe Gen2 speeds?

The drive is backward compatible with PCIe Gen2 slots, but sequential reads will be capped below the advertised 3300 MBps and writes below 2900 MBps.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。