EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
A 24 V, 5 A industrial DIN-rail power supply delivering 120 W from a 100–240 V input with 85 % efficiency and overload, over-voltage, short-circuit and over-current protection
The myVolts 24V 5A 120W DIN Rail Power Supply converts 100-240V AC input into a regulated 24V DC output delivering up to 5A. It mounts on standard 35mm DIN rail for industrial control panels, lighting systems and security monitoring equipment. The enclosed unit weighs 10kg and uses forced-air cooling.
Installers fitting 35mm DIN rail enclosures for automation, lighting or surveillance will find the guide-rail mounting straightforward. The hollow-shell design aids passive heat dissipation at 85% efficiency. Builders needing redundant supplies, higher current density or rackmount form factors should look at other solutions.
Continuous 120W output at 24V 5A with 85% working efficiency determines thermal load and wiring gauge. Ripple stays within 200mVp-p and voltage accuracy is ±1% across the 100-240V universal input range. Automatic recovery protects against overload, over-voltage, short-circuit and over-current events.
| Type | AT |
|---|
The unit operates from 100 to 240 V AC, so it works on standard mains worldwide without a selector switch.
Yes, the supply is designed for guide-rail mounting on a standard 35 mm DIN rail.
Measure the DC output with a multimeter; it should read 24 V ±1 % with ripple below 200 mV peak-to-peak.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?