EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
Delivers 300 W from a 12 V DC source to ATX and SATA devices in compact builds
The myVolts 300W unit converts a 12V DC source into standard ATX rails for Mini-ITX and 1U chassis. It targets embedded PCs, HTPC units, POS terminals and network appliances that run from an external adapter. Builders needing internal AC-DC conversion or redundant server supplies should look elsewhere.
The board delivers up to 300W across ATX, SATA and auxiliary connectors while drawing a maximum of 25A from the 11.4-12.6V input. Industrial solid capacitors maintain stable voltage under load. Headroom disappears quickly with multiple drives or high-power add-in cards, so total system draw must stay well below the rating.
With no moving parts the module adds no acoustic noise; heat is dissipated through the 154 x 35 x 15mm PCB and case airflow. At full load the 15% loss appears as warmth, so enclosure ventilation matters. The unit is rated for 45-75% humidity in operation and survives -40 to 70°C in storage.
| Type | AT |
|---|
The module accepts 11.4 to 12.6V DC and draws up to 25A, so any 12V adapter that can supply at least 25A continuously will power it.
Measure input and output power under load; the over-current and short-circuit protections engage automatically when limits are exceeded.
The box contains the 300W module, a 24-pin to 20-pin ATX cable, a DC input cable and an AUX cable; a 12V power adapter must be purchased separately.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?