myVolts
myVolts MCH-K305D adjustable power supply 30V 5A 150W
An adjustable DC power supply delivering 0 to 30 volts at up to 5 amps with 150 watts output, overvoltage and over-temperature protection, milliamp resolution, and a high-contrast LCD display
- TypeAT
- Adjustable 0-30 V and 0-5 A for flexible bench testing
- Switching regulator delivers >85 % efficiency with low 20 mA ripple
- LCD shows voltage and current to ±0.5 % accuracy
- CE certified with over-voltage, over-temperature and anti-shock protection
- Compact 220×70×160 mm unit weighs about 2 kg
Adjustable DC power supply 0-30 V 5 A
The myVolts MCH-K305D is a switching DC regulator that delivers continuously adjustable output from 0 to 30 volts and 0 to 5 amps with a maximum of 150 watts. It is built for bench work such as electronic repair, experimental circuits and ageing tests where stable, low-ripple power is required.
Check mains voltage and load needs
The unit accepts 110 V or 220 V input at 50 Hz or 60 Hz so verify which mains supply is available at the bench. Ensure the device under test does not exceed 5 A or 150 W and that the operating environment stays within -20 °C to 80 °C with humidity below 90 %. The supply weighs about 2 kg and measures 220 mm deep by 70 mm wide by 160 mm high.
Replaces fixed-voltage bench units
This supply upgrades from single-output adapters when a project demands variable voltage and current with milliamp resolution and ±0.5 % display accuracy. Overvoltage, over-temperature and anti-shock protection plus CE certification make the jump worthwhile for labs that need programmable safety limits and a high-contrast LCD readout.
주요 특징
- Adjustable 0-30 V and 0-5 A for flexible bench testing
- Switching regulator delivers >85 % efficiency with low 20 mA ripple
- LCD shows voltage and current to ±0.5 % accuracy
- CE certified with over-voltage, over-temperature and anti-shock protection
- Compact 220×70×160 mm unit weighs about 2 kg
사양
| Type | AT |
|---|
이 상품에 대한 질문
Does the MCH-K305D include test leads or must they be bought separately?
The MCH-K305D is supplied as the bench unit only; test leads are not included and must be sourced separately.
Should I choose the 110 V or 220 V input version for my bench?
Select the version that matches your mains supply — the unit is built for either 110 V or 220 V operation at 50/60 Hz.
What does the 150 W rating mean when I am driving a 30 V load?
At 30 V the supply can deliver up to 5 A, giving the full 150 W; lower voltages allow the same 5 A up to the power limit.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



