EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
A fanless 160 W ATX power module that converts 12 V DC input to 24-pin output for compact ITX builds
This fanless power module accepts a 12V DC source and delivers up to 160W through a standard 24-pin ATX connector. It provides +12V, +5V, +3.3V and -5VSB rails for small-form-factor or embedded builds. The compact 53 x 27.5 x 11.5mm board uses solid polymer capacitors for high-temperature stability. Builders needing an internal AC-DC unit or higher wattage should look elsewhere.
The single specification that decides compatibility is the 2.5mm inner, 5.5mm outer diameter DC barrel jack requiring a 12V supply. Your source must match this exact connector geometry and voltage or the module will not power on. No adapter is included in the package.
The bundle adds one set of power cables to reach the motherboard and peripherals. Because capacitor batches vary, the physical appearance of the board may differ from product photos without changing electrical performance. No mounting hardware, software or additional connectors are supplied.
| Type | AT |
|---|
It is the maximum combined power the module can deliver across its +12 V, +5 V, +3.3 V and -5 VSB rails from a 12 V DC source.
It restricts the input to a 12 V DC supply fitted with a matching 5.5 mm outer, 2.5 mm inner connector.
The module measures 53 mm long, 27.5 mm wide and 11.5 mm high, so it fits most Pico-ITX cases that accept those dimensions.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?