저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB DDR5 5600 CL46 16x96GB ECC Registered RDIMM memory upgrade for Supermicro H14DST-F

SKU CH-4XH8-2BWB6

A 1.5 TB DDR5 ECC registered RDIMM kit of sixteen 96 GB modules running at 5600 MHz CL46 1.1 V for the Supermicro H14DST-F motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

구성 30개 더 보기
  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC architecture corrects single-bit errors on the fly
  • 10 V operation matches the server memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard

1.5 TB DDR5 RDIMM kit for Supermicro H14DST-F

This 1.5 TB kit contains sixteen 96 GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It is designed for administrators who need maximum supported capacity on this specific platform.

Capacity and headroom

Sixteen dual-rank 96 GB modules deliver the full 1.5 TB the board can address when all 288-pin slots are filled. The 2Rx4 organisation and 1.10 V operating voltage keep the memory controller within spec at DDR5 5600. Systems that require more memory than this kit provides will need a different motherboard or platform.

DDR5 5600 registered interface limits

The DDR5 5600 (PC5 44800) registered interface runs at CL46 latency with a 1.1 V supply. Registered buffering removes electrical load from the controller so all sixteen slots operate at the rated frequency. Boards that only accept unbuffered UDIMMs or SODIMMs cannot use these modules, and platforms limited to lower DDR5 speeds will down-clock the kit.

주요 특징

  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC architecture corrects single-bit errors on the fly
  • 10 V operation matches the server memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this 16 x 96 GB DDR5 5600 RDIMM kit work in my Supermicro H14DST-F alongside any existing memory?

The kit is spec-matched to the H14DST-F population rules; install all 16 modules in the approved slots so the registered ECC architecture runs fully populated at 5600 MHz, 1.1 V, CL46.

How can I verify the kit is running as intended after installation?

In the BIOS or system firmware check that all 16 DIMMs report 96 GB each, DDR5 5600 speed, CL46 latency, 1.1 V operation and ECC active.

What does the 1.5 TB package contain and is anything else required?

The box includes the 16 x 96 GB DDR5 5600 2Rx4 288-pin ECC Registered RDIMM modules; no additional parts are needed for installation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.