NEMIX RAM DDR5 5600 ECC RDIMM 1.5TB (12x128GB) CL46 1.1V 2Rx4 Supermicro H14DST-FL memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 1.5 TB DDR5 ECC registered RDIMM kit of sixteen 96 GB modules running at 5600 MHz CL46 1.1 V for the Supermicro H14DST-F motherboard
Size 1.5TB 16X96GB
Struck-through versions exist but are not stocked here.
This 1.5 TB kit contains sixteen 96 GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It is designed for administrators who need maximum supported capacity on this specific platform.
Sixteen dual-rank 96 GB modules deliver the full 1.5 TB the board can address when all 288-pin slots are filled. The 2Rx4 organisation and 1.10 V operating voltage keep the memory controller within spec at DDR5 5600. Systems that require more memory than this kit provides will need a different motherboard or platform.
The DDR5 5600 (PC5 44800) registered interface runs at CL46 latency with a 1.1 V supply. Registered buffering removes electrical load from the controller so all sixteen slots operate at the rated frequency. Boards that only accept unbuffered UDIMMs or SODIMMs cannot use these modules, and platforms limited to lower DDR5 speeds will down-clock the kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is spec-matched to the H14DST-F population rules; install all 16 modules in the approved slots so the registered ECC architecture runs fully populated at 5600 MHz, 1.1 V, CL46.
In the BIOS or system firmware check that all 16 DIMMs report 96 GB each, DDR5 5600 speed, CL46 latency, 1.1 V operation and ECC active.
The box includes the 16 x 96 GB DDR5 5600 2Rx4 288-pin ECC Registered RDIMM modules; no additional parts are needed for installation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?