저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 2Rx4 CL40 1.1V ECC Registered RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-R16W-W95AB

128 GB DDR5 4800 Registered ECC RDIMM at CL40 and 1.1 V, validated for Supermicro H14DSG-O-CPU servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 128GB capacity expands server memory for heavy workloads
  • DDR5 4800 speed delivers rated bandwidth for H14DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors automatically
  • CL40 latency with 1.1V operation matches controller spec exactly
  • 288-pin RDIMM form factor fits motherboard memory slots precisely

Supermicro H14DSG-O-CPU DDR5 upgrade

This 128GB DDR5 4800 RDIMM is built for the Supermicro H14DSG-O-CPU motherboard. Registered ECC architecture meets the board's population rules so every slot is recognised at full capacity. Server administrators who need validated, single-part-number compatibility for this platform can deploy without guessing. Builders using other Supermicro boards or non-RDIMM slots should verify their manual first.

128GB CL40 1.1V registered headroom

The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.1V. Registered buffering offloads the memory controller, allowing full-slot populations to operate at rated speed while ECC corrects single-bit errors on the fly. Workloads that exceed 128GB per DIMM or require lower latency than CL40 will need a different module specification.

288-pin RDIMM form factor fit

The 288-pin Registered DIMM fits only motherboards wired for DDR5 RDIMMs with matching population rules. It frees the builder from mixing ranks or voltages because the part matches the H14DSG-O-CPU's validated configuration. Systems that accept only UDIMM, SODIMM or earlier DDR generations cannot use this module.

주요 특징

  • 128GB capacity expands server memory for heavy workloads
  • DDR5 4800 speed delivers rated bandwidth for H14DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors automatically
  • CL40 latency with 1.1V operation matches controller spec exactly
  • 288-pin RDIMM form factor fits motherboard memory slots precisely

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this 128GB DDR5 4800 CL40 RDIMM run at rated speed in a Supermicro H14DSG-O-CPU alongside existing DDR5 modules?

Yes, provided the existing modules are also DDR5 4800 Registered ECC RDIMMs with matching 1.1V voltage and CL40 timing; mixed speeds or ranks will force the system to run at the lowest common settings.

How can I confirm the module is recognised at full 128GB capacity and correct CL40 timing after installation?

Check the BIOS memory information page or run a tool such as dmidecode; it should report 128GB, DDR5 4800, 2Rx4 Registered ECC, 1.1V and CAS latency 40.

Does the package include only the 128GB DDR5 4800 RDIMM or are extra items such as a heat spreader supplied?

The box contains the 128GB DDR5 4800 2Rx4 CL40 1.1V 288-pin ECC Registered RDIMM only; no heat spreader or additional accessories are included.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.