暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR5 RDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 2Rx4 CL40 1.1V ECC Registered RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-R16W-W95AB

128 GB DDR5 4800 Registered ECC RDIMM at CL40 and 1.1 V, validated for Supermicro H14DSG-O-CPU servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

他に 30点の構成を表示
  • 128GB capacity expands server memory for heavy workloads
  • DDR5 4800 speed delivers rated bandwidth for H14DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors automatically
  • CL40 latency with 1.1V operation matches controller spec exactly
  • 288-pin RDIMM form factor fits motherboard memory slots precisely

Supermicro H14DSG-O-CPU DDR5 upgrade

This 128GB DDR5 4800 RDIMM is built for the Supermicro H14DSG-O-CPU motherboard. Registered ECC architecture meets the board's population rules so every slot is recognised at full capacity. Server administrators who need validated, single-part-number compatibility for this platform can deploy without guessing. Builders using other Supermicro boards or non-RDIMM slots should verify their manual first.

128GB CL40 1.1V registered headroom

The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.1V. Registered buffering offloads the memory controller, allowing full-slot populations to operate at rated speed while ECC corrects single-bit errors on the fly. Workloads that exceed 128GB per DIMM or require lower latency than CL40 will need a different module specification.

288-pin RDIMM form factor fit

The 288-pin Registered DIMM fits only motherboards wired for DDR5 RDIMMs with matching population rules. It frees the builder from mixing ranks or voltages because the part matches the H14DSG-O-CPU's validated configuration. Systems that accept only UDIMM, SODIMM or earlier DDR generations cannot use this module.

特長

  • 128GB capacity expands server memory for heavy workloads
  • DDR5 4800 speed delivers rated bandwidth for H14DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors automatically
  • CL40 latency with 1.1V operation matches controller spec exactly
  • 288-pin RDIMM form factor fits motherboard memory slots precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 128GB DDR5 4800 CL40 RDIMM run at rated speed in a Supermicro H14DSG-O-CPU alongside existing DDR5 modules?

Yes, provided the existing modules are also DDR5 4800 Registered ECC RDIMMs with matching 1.1V voltage and CL40 timing; mixed speeds or ranks will force the system to run at the lowest common settings.

How can I confirm the module is recognised at full 128GB capacity and correct CL40 timing after installation?

Check the BIOS memory information page or run a tool such as dmidecode; it should report 128GB, DDR5 4800, 2Rx4 Registered ECC, 1.1V and CAS latency 40.

Does the package include only the 128GB DDR5 4800 RDIMM or are extra items such as a heat spreader supplied?

The box contains the 128GB DDR5 4800 2Rx4 CL40 1.1V 288-pin ECC Registered RDIMM only; no heat spreader or additional accessories are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。