NEMIX RAM
NEMIX RAM 16GB 2x8GB DDR4 2133 CL15 SODIMM POSIFLEX RT-5015
A 16 GB DDR4 SODIMM kit (2 × 8 GB) rated at 2133 MT/s CL15 for the POSIFLEX RT-5015 terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking on the POSIFLEX RT-5015 terminal
- DDR4 2133 MHz PC4-17000 CL15 delivers responsive performance for point-of-sale workloads
- Low 1.2 V operation reduces power draw and heat in compact kiosk enclosures
- 260-pin SODIMM form factor installs directly into the terminal without adapters
- Rigorously stress-tested modules built with major OEM chips ensure long-term reliability
POSIFLEX RT-5015 DDR4 SODIMM kit
This 16 GB kit contains two 8 GB DDR4 2133 SODIMM modules built for the POSIFLEX RT-5015 terminal. Each stick runs at 1.2 V with CL15 latency and uses a 260-pin unbuffered non-ECC layout. The dual-rank 2Rx8 organisation matches the platform’s memory controller.
Upgrade from 8 GB or slower DDR4
Replacing a single 8 GB module or a lower-speed DDR4 kit adds capacity and bandwidth for point-of-sale workloads. The jump is worthwhile when the terminal runs multiple applications or larger databases that exceed the original memory limit. No benefit appears if the system already has 16 GB of matched DDR4 2133 memory.
Tool-free slot access on the terminal
The RT-5015 exposes SODIMM slots behind a service panel so installation takes minutes with no tools. Align the notch, press firmly until the latches click, then verify the new total in BIOS. The most common issue is inserting a module at an angle, which leaves a pin unseated and prevents boot.
주요 특징
- 16 GB dual-channel kit boosts multitasking on the POSIFLEX RT-5015 terminal
- DDR4 2133 MHz PC4-17000 CL15 delivers responsive performance for point-of-sale workloads
- Low 1.2 V operation reduces power draw and heat in compact kiosk enclosures
- 260-pin SODIMM form factor installs directly into the terminal without adapters
- Rigorously stress-tested modules built with major OEM chips ensure long-term reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT |
이 상품에 대한 질문
Does the 260-pin SODIMM form factor match the memory slots in the POSIFLEX RT-5015 terminal?
Yes, this kit uses the standard 260-pin DDR4 SODIMM layout required by the POSIFLEX RT-5015, so each 8 GB module seats directly into the terminal's two memory sockets.
What is the correct orientation step when inserting the modules into the RT-5015, and what mistake do installers often make?
Align the notch on the module's gold edge with the key in the slot, press firmly until the side clips click; the common error is stopping before the clips engage, leaving the module partially seated.
Will the memory require any firmware updates or periodic replacement after installation in the POSIFLEX RT-5015?
No firmware update is needed; the JEDEC-standard 2133 MT/s CL15 1.2 V modules run at rated speed on first boot and have no wear-out mechanism, so they remain in service for the terminal's lifetime.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
US$104.99
0.00133339BTC
재고 있음
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
US$7.99
0.00010147BTC
재고 있음