SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497222BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 2933 ECC RDIMM 2Rx8 CL21 1.2V 288-Pin Dell PowerEdge FC640
16GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2V operation for Dell PowerEdge FC640 servers
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 2933 MHz boosts server throughput
- ECC registered design protects data integrity
- 2Rx8 dual-rank layout maximises memory density
- 20 V operation lowers power draw
- Validated for Dell PowerEdge FC640 compatibility
Dell PowerEdge FC640 compatible memory
This 16 GB DDR4 2933 module is built for the Dell PowerEdge FC640 server. It delivers ECC registered operation for data integrity in enterprise workloads. The single DIMM format suits capacity upgrades or replacement in qualified systems. IT teams maintaining this platform can install it without proprietary Dell part sourcing.
Registered ECC RDIMM build
Registered buffering reduces electrical load on the server memory controller for stable operation at 2933 MT/s. The 288-pin DDR4 RDIMM keying prevents insertion into unbuffered or consumer slots. ECC circuitry corrects single-bit errors to protect critical data. No heat spreader is fitted, matching the original Dell thermal design for this chassis.
2933 MT/s CL21 2Rx8 specification
The module runs at DDR4 2933 (PC4-23400) with CAS latency 21 at 1.2 V. Dual-rank 2Rx8 organisation provides density for the FC640 memory architecture. Systems requiring a different speed grade, rank configuration or voltage will not operate correctly with this part.
주요 특징
- 16 GB DDR4 2933 MHz boosts server throughput
- ECC registered design protects data integrity
- 2Rx8 dual-rank layout maximises memory density
- 20 V operation lowers power draw
- Validated for Dell PowerEdge FC640 compatibility
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2933MHZ RDIMM Registered Server Memory |
| Part Number | MR23400-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
What does the DDR4 2933 (PC4-23400) rating mean for maximum data rate?
The module runs at 2933 MT/s, giving a peak bandwidth of PC4-23400; the server memory controller will not exceed this speed.
Will this 288-pin RDIMM fit the Dell PowerEdge FC640 memory slots?
Yes, the 288-pin DDR4 RDIMM form factor matches the FC640 DIMM slots; the registered design and 2Rx8 organisation are supported by that platform.
How do I install the module, and what step is often missed?
Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16 GB appears at 2933 MT/s with ECC active.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
