저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR5 4800 ECC RDIMM Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-7G6S-24ZXZ

A 192 GB DDR5 ECC registered memory kit with six 32 GB modules running at 4800 MHz, CL40 and 1.1 V for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from six 32 GB modules for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput for Supermicro H13DSG-O-CPU-D
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters

Exact-match upgrade for Supermicro H13DSG-O-CPU-D

This 192GB kit delivers six 32GB DDR5 4800 RDIMM modules built to the board's precise rank, voltage, and timing requirements. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly.

The specification that decides fit is 2Rx8

The Supermicro H13DSG-O-CPU-D demands 288-pin DDR5 RDIMM modules with exactly this rank, voltage, and latency. UDIMM, SODIMM, or any other rank or voltage will not be recognised at full capacity or will fail to post.

Tool-free press-in installation.

Modules seat into the 288-pin slots with even pressure until the retention clips click. The manual for this motherboard defines the approved DIMM population sequence — skipping that step is the most common cause of partial capacity detection or boot failure.

주요 특징

  • 192 GB total capacity from six 32 GB modules for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput for Supermicro H13DSG-O-CPU-D
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 4800 MT/s rating mean once the kit is installed in a Supermicro H13DSG-O-CPU-D?

The modules run at DDR5-4800 (PC5-38400) with CL40 timing at 1.1 V, so the memory controller recognises the full 192 GB capacity and operates each of the six 32 GB RDIMMs at the rated speed.

How does the 288-pin RDIMM interface affect what the motherboard can actually use?

The board requires registered ECC RDIMMs; this 288-pin kit matches that requirement exactly, allowing all slots to be populated with 2Rx8 modules without exceeding the controller's electrical load limits.

What physical clearance does the 6-module kit need inside the server chassis?

Each module is a standard-height 288-pin DDR5 RDIMM without a heat spreader, so they fit the regular DIMM slots on the H13DSG-O-CPU-D and only require the normal slot spacing defined by the motherboard layout.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.