저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5200 CL38 UDIMM memory upgrade

SKU CH-3M91-RGRWE

A 32 GB DDR5 kit running at 5200 MT/s with CL38 latency, validated for SuperMicro workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit (2 × 16 GB) doubles desktop capacity
  • DDR5 5200 MT/s speed matches Supermicro workstation spec
  • CL38 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG systems

NEMIX RAM 32GB DDR5 5200 Kit

This 32 GB kit contains two 16 GB DDR5 UDIMM modules rated at 5200 MT/s with a CAS latency of 38. It is built for Supermicro desktop workstations such as the SYS-531AD-I and C9Z790-CG that require non-ECC unbuffered memory. The kit suits professionals upgrading compatible Supermicro systems for compute-heavy workloads.

Installing in Supermicro Workstations

The 288-pin UDIMMs slot into standard DDR5 DIMM sockets on supported Supermicro motherboards. Because the modules are unbuffered and non-ECC, they must only be used in platforms that explicitly accept that configuration; registered or ECC-only boards will not POST. Always consult the system manual for the approved population order before fitting the sticks.

Sustained Load Behaviour on DDR5 5200

Modules are stress-tested under load at the rated 5200 MT/s speed and 1.10 V to verify stability during extended compute tasks. The 1Rx8 organisation and Samsung, Micron or Hynix die selection aim to deliver consistent throughput without throttling during long rendering or simulation runs. No heat spreader is fitted, so adequate chassis airflow is required to maintain operating temperatures.

주요 특징

  • 32 GB kit (2 × 16 GB) doubles desktop capacity
  • DDR5 5200 MT/s speed matches Supermicro workstation spec
  • CL38 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG systems

사양

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I verify the kit is running at DDR5 5200 with CL38 after installation?

Enter the BIOS or use a tool like CPU-Z to confirm the memory frequency reads 5200 MT/s and the CAS latency shows 38; the SPD should also report PC5-41600 and 1.10 V.

What exactly ships in the box and is anything else required?

The box contains two 16 GB 288-pin DDR5 UDIMM modules for a total of 32 GB; no heat spreaders, cables or additional parts are included or needed.

Which capacity kit should I choose for a Supermicro SYS-531AD-I or C9Z790-CG workstation?

This 32 GB (2×16 GB) 1Rx8 kit matches the validated part number MD41600-618K2 for those systems; select it when you need 32 GB of DDR5 5200 non-ECC unbuffered memory.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.