我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5200 CL38 UDIMM memory upgrade

SKU CH-3M91-RGRWE

A 32 GB DDR5 kit running at 5200 MT/s with CL38 latency, validated for SuperMicro workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit (2 × 16 GB) doubles desktop capacity
  • DDR5 5200 MT/s speed matches Supermicro workstation spec
  • CL38 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG systems

NEMIX RAM 32GB DDR5 5200 Kit

This 32 GB kit contains two 16 GB DDR5 UDIMM modules rated at 5200 MT/s with a CAS latency of 38. It is built for Supermicro desktop workstations such as the SYS-531AD-I and C9Z790-CG that require non-ECC unbuffered memory. The kit suits professionals upgrading compatible Supermicro systems for compute-heavy workloads.

Installing in Supermicro Workstations

The 288-pin UDIMMs slot into standard DDR5 DIMM sockets on supported Supermicro motherboards. Because the modules are unbuffered and non-ECC, they must only be used in platforms that explicitly accept that configuration; registered or ECC-only boards will not POST. Always consult the system manual for the approved population order before fitting the sticks.

Sustained Load Behaviour on DDR5 5200

Modules are stress-tested under load at the rated 5200 MT/s speed and 1.10 V to verify stability during extended compute tasks. The 1Rx8 organisation and Samsung, Micron or Hynix die selection aim to deliver consistent throughput without throttling during long rendering or simulation runs. No heat spreader is fitted, so adequate chassis airflow is required to maintain operating temperatures.

商品特色

  • 32 GB kit (2 × 16 GB) doubles desktop capacity
  • DDR5 5200 MT/s speed matches Supermicro workstation spec
  • CL38 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG systems

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I verify the kit is running at DDR5 5200 with CL38 after installation?

Enter the BIOS or use a tool like CPU-Z to confirm the memory frequency reads 5200 MT/s and the CAS latency shows 38; the SPD should also report PC5-41600 and 1.10 V.

What exactly ships in the box and is anything else required?

The box contains two 16 GB 288-pin DDR5 UDIMM modules for a total of 32 GB; no heat spreaders, cables or additional parts are included or needed.

Which capacity kit should I choose for a Supermicro SYS-531AD-I or C9Z790-CG workstation?

This 32 GB (2×16 GB) 1Rx8 kit matches the validated part number MD41600-618K2 for those systems; select it when you need 32 GB of DDR5 5200 non-ECC unbuffered memory.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。