저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR4 UDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933 CL21 UDIMM Supermicro X12SCQ/X12SCZ-QF memory upgrade

SKU CH-TKYH-YFB86

32 GB kit of four 8 GB DDR4 UDIMMs running at 2933 MHz CL21 1.2 V, validated for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB kit expands capacity for demanding workloads using four 8 GB modules
  • DDR4-2933 speed matches the board's rated frequency for full-performance operation
  • CL21 latency and 1.20 V voltage meet the memory controller's exact timing requirements
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF motherboard slots
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specs

Exact DDR4-2933 UDIMM Kit

This 32 GB kit contains four 8 GB DDR4-2933 (PC4-23400) unbuffered UDIMMs rated at CL21 and 1.20 V. It is built with major OEM chips and validated for the Supermicro X12SCQ and X12SCZ-QF motherboards so the memory controller recognises the full capacity at rated speed.

For Supermicro X12SCQ

This kit suits builders populating four UDIMM slots on the named Supermicro boards with non-ECC memory. It does not suit systems that require ECC registered modules, SODIMM form factors, or a different DDR generation, and it cannot serve platforms limited to lower capacities per slot.

Fits four UDIMM slots at 1.20 V

The 288-pin modules drop straight into the board's UDIMM sockets without a heat spreader, leaving clearance for standard CPU coolers. Running at the specified 1.20 V keeps power draw low, while the matched rank and timing free the memory controller from manual configuration.

주요 특징

  • 32 GB kit expands capacity for demanding workloads using four 8 GB modules
  • DDR4-2933 speed matches the board's rated frequency for full-performance operation
  • CL21 latency and 1.20 V voltage meet the memory controller's exact timing requirements
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF motherboard slots
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specs

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

My board is a Supermicro X12SCQ — does this 32 GB (4 × 8 GB) DDR4 2933 CL21 UDIMM kit match the slot count and form factor?

Yes. The kit provides four 288-pin UDIMM modules, which is the exact form factor and pin count the X12SCQ and X12SCZ-QF motherboards require.

If I add this kit to my existing Supermicro X12SCQ, will the board run all modules at DDR4 2933?

The board's memory controller sets the final speed; installing matched 1Rx8 1.20 V CL21 modules gives the best chance of running at the rated 2933 MT/s.

After seating the four sticks, how do I confirm the system sees the full 32 GB at CL21?

Enter the BIOS or use a tool like CPU-Z and verify the reported capacity shows 32 GB, speed reads 2933 MT/s, and timings show 21-21-21.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.