我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR4 UDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933 CL21 UDIMM Supermicro X12SCQ/X12SCZ-QF memory upgrade

SKU CH-TKYH-YFB86

32 GB kit of four 8 GB DDR4 UDIMMs running at 2933 MHz CL21 1.2 V, validated for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB kit expands capacity for demanding workloads using four 8 GB modules
  • DDR4-2933 speed matches the board's rated frequency for full-performance operation
  • CL21 latency and 1.20 V voltage meet the memory controller's exact timing requirements
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF motherboard slots
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specs

Exact DDR4-2933 UDIMM Kit

This 32 GB kit contains four 8 GB DDR4-2933 (PC4-23400) unbuffered UDIMMs rated at CL21 and 1.20 V. It is built with major OEM chips and validated for the Supermicro X12SCQ and X12SCZ-QF motherboards so the memory controller recognises the full capacity at rated speed.

For Supermicro X12SCQ

This kit suits builders populating four UDIMM slots on the named Supermicro boards with non-ECC memory. It does not suit systems that require ECC registered modules, SODIMM form factors, or a different DDR generation, and it cannot serve platforms limited to lower capacities per slot.

Fits four UDIMM slots at 1.20 V

The 288-pin modules drop straight into the board's UDIMM sockets without a heat spreader, leaving clearance for standard CPU coolers. Running at the specified 1.20 V keeps power draw low, while the matched rank and timing free the memory controller from manual configuration.

商品特色

  • 32 GB kit expands capacity for demanding workloads using four 8 GB modules
  • DDR4-2933 speed matches the board's rated frequency for full-performance operation
  • CL21 latency and 1.20 V voltage meet the memory controller's exact timing requirements
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF motherboard slots
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specs

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

My board is a Supermicro X12SCQ — does this 32 GB (4 × 8 GB) DDR4 2933 CL21 UDIMM kit match the slot count and form factor?

Yes. The kit provides four 288-pin UDIMM modules, which is the exact form factor and pin count the X12SCQ and X12SCZ-QF motherboards require.

If I add this kit to my existing Supermicro X12SCQ, will the board run all modules at DDR4 2933?

The board's memory controller sets the final speed; installing matched 1Rx8 1.20 V CL21 modules gives the best chance of running at the rated 2933 MT/s.

After seating the four sticks, how do I confirm the system sees the full 32 GB at CL21?

Enter the BIOS or use a tool like CPU-Z and verify the reported capacity shows 32 GB, speed reads 2933 MT/s, and timings show 21-21-21.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。