我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2933MHz CL21 1Rx8 1.2V 288-pin UDIMM memory upgrade

SKU CH-VGEK-RG0RX

A 32 GB dual-channel DDR4 2933 MHz kit with CL21 timing and 1.2 V voltage, built from major OEM chips and verified for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • Exact 32 GB dual-channel kit tuned to DDR4-2933 CL21 1.20 V for instant recognition
  • Major OEM Samsung Micron Hynix chips tested at rated speed for stable operation
  • 288-pin UDIMM 1Rx8 non-ECC form factor matches Supermicro X12SCQ X12SCZ-QF slot requirements
  • Two 16 GB modules populate supported banks to reach full 32 GB capacity
  • Lifetime replacement coverage plus US-based technical support included

Exact-Match DDR4 Kit

This 32GB kit contains two 16GB DDR4 2933MHz modules built to the precise 1Rx8, CL21, 1.20V specification that Supermicro X12SCQ and X12SCZ-QF motherboards expect. The unbuffered, non-ECC UDIMM form factor ensures the memory controller recognises the full capacity at rated speed without manual tuning.

Verified Fitment for Supermicro Boards

The kit is validated for the X12SCQ and X12SCZ-QF platforms, matching their DDR4 2933 (PC4-23400) requirement and 288-pin UDIMM slot layout. Major OEM chips from Samsung, Micron or Hynix are tested at the rated timing and voltage, delivering a stable, cost-effective upgrade that follows the board's population rules.

Not for ECC or Laptop Builds

Buyers who need error-correcting code memory or SODIMM modules for notebooks cannot use this kit; it is strictly non-ECC desktop UDIMM. Systems requiring registered or load-reduced DIMMs, or a different DDR generation, are also incompatible.

商品特色

  • Exact 32 GB dual-channel kit tuned to DDR4-2933 CL21 1.20 V for instant recognition
  • Major OEM Samsung Micron Hynix chips tested at rated speed for stable operation
  • 288-pin UDIMM 1Rx8 non-ECC form factor matches Supermicro X12SCQ X12SCZ-QF slot requirements
  • Two 16 GB modules populate supported banks to reach full 32 GB capacity
  • Lifetime replacement coverage plus US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 1.2 V DDR4 modules need any firmware updates or heatsink additions later?

The kit runs at the standard 1.20 V with no heat spreader fitted; no firmware is involved and no extra cooling is required for normal desktop operation.

What limit appears first when the CL21 2933 MHz sticks run continuously at full load?

The memory controller on the Supermicro X12SCQ or X12SCZ-QF board will hit its maximum supported bandwidth before the modules reach any thermal or timing ceiling.

How much power do the two 16 GB UDIMMs draw during all-day operation?

Each 1Rx8 module operates at 1.20 V, so the pair consumes only a few watts total and adds negligible heat to the chassis.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。