NEMIX RAM 32GB (2x16GB) DDR4 2933MHz CL21 1.2V 288-pin UDIMM for Supermicro X12SAE X12SCA-F memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 UDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 32 GB dual-channel DDR4 2933 MHz kit with CL21 timing and 1.2 V voltage, built from major OEM chips and verified for Supermicro X12SCQ and X12SCZ-QF motherboards
Size 32GB 2X16GB
This 32GB kit contains two 16GB DDR4 2933MHz modules built to the precise 1Rx8, CL21, 1.20V specification that Supermicro X12SCQ and X12SCZ-QF motherboards expect. The unbuffered, non-ECC UDIMM form factor ensures the memory controller recognises the full capacity at rated speed without manual tuning.
The kit is validated for the X12SCQ and X12SCZ-QF platforms, matching their DDR4 2933 (PC4-23400) requirement and 288-pin UDIMM slot layout. Major OEM chips from Samsung, Micron or Hynix are tested at the rated timing and voltage, delivering a stable, cost-effective upgrade that follows the board's population rules.
Buyers who need error-correcting code memory or SODIMM modules for notebooks cannot use this kit; it is strictly non-ECC desktop UDIMM. Systems requiring registered or load-reduced DIMMs, or a different DDR generation, are also incompatible.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD23400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit runs at the standard 1.20 V with no heat spreader fitted; no firmware is involved and no extra cooling is required for normal desktop operation.
The memory controller on the Supermicro X12SCQ or X12SCZ-QF board will hit its maximum supported bandwidth before the modules reach any thermal or timing ceiling.
Each 1Rx8 module operates at 1.20 V, so the pair consumes only a few watts total and adds negligible heat to the chassis.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?