저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933 ECC UDIMM 2Rx8 CL21 1.2V 288-pin memory upgrade

SKU CH-YJNA-D4WQ6

32 GB DDR4 ECC UDIMM at 2933 MHz CL21 1.2 V 288-pin, verified for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 32GB

  • 32 GB capacity doubles usable memory for demanding workloads
  • ECC protection detects and corrects single-bit errors on the fly
  • DDR4-2933 CL21 timing matches the controller's rated speed exactly
  • 2 V operation keeps power draw low in dense configurations
  • 288-pin UDIMM form factor fits Supermicro X12SAE and X12SCA-F boards

32 GB DDR4 2933 ECC UDIMM

This 32 GB DDR4 module runs at 2933 MT/s with CL21 latency and 1.2 V operation. It is an unbuffered ECC UDIMM built with a 2Rx8 rank structure on a 288-pin PCB. The part is validated for Supermicro X12SAE and X12SCA-F motherboards that require DDR4 2933 PC4-23400 ECC memory.

Suited for ECC workstations

The module fits systems that accept unbuffered ECC UDIMMs at the specified speed and rank. Builders needing registered DIMMs, SODIMMs, non-ECC memory, or a different voltage should select a different part. Capacity beyond a single 32 GB stick depends on the motherboard's slot count and population rules.

2Rx8 rank at 1.2 V

The 2Rx8 organisation at 1.20 V is the specific electrical signature the memory controller expects. A mismatched rank or voltage will prevent the system from recognising the full 32 GB or running at the rated 2933 MT/s. Verify the board's approved DIMM population order before installation.

주요 특징

  • 32 GB capacity doubles usable memory for demanding workloads
  • ECC protection detects and corrects single-bit errors on the fly
  • DDR4-2933 CL21 timing matches the controller's rated speed exactly
  • 2 V operation keeps power draw low in dense configurations
  • 288-pin UDIMM form factor fits Supermicro X12SAE and X12SCA-F boards

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-328K1
Capacity32GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I pick this 32GB 2Rx8 CL21 kit or a different capacity for my Supermicro X12SAE?

This kit provides exactly 32GB in a single 2Rx8 ECC UDIMM that matches the board's required rank, voltage, and timing so the controller recognises full capacity at the rated 2933MHz speed.

What does the 2933MHz rating deliver once installed in a Supermicro X12SAE?

The module runs at DDR4-2933 (PC4-23400) with CL21 latency at 1.2V, giving the memory controller the precise frequency and timing it expects for stable operation at full rated throughput.

How does the 288-pin DDR4 ECC UDIMM interface limit real-world use?

The 288-pin unbuffered ECC form factor fits only DDR4 UDIMM slots — not RDIMM or SODIMM sockets — and the ECC function corrects single-bit errors on the fly to prevent silent data corruption.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.